Record Display for the EPA National Library Catalog

RECORD NUMBER: 44 OF 131

OLS Field Name OLS Field Data
Main Title Evaluating Parameter Estimation Techniques Applied in Vadose Zone Modeling.
Author Weaver, J. W. ; Johnson, J. ; Ravi, V. ; Lien, B. K. ;
CORP Author Robert S. Kerr Environmental Research Lab., Ada, OK. ;Dynamac Corp., Ada, OK.
Publisher 1993
Year Published 1993
Report Number EPA/600/A-93/148;
Stock Number PB93-212371
Additional Subjects Ground water movement ; Path of pollutants ; Parametric analysis ; Computerized simulation ; Vadose water ; Water pollution detection ; Soil water movement ; Gasoline ; Hydraulic properties ; Reprints ; Vadose zone ; KOPT(Kinematic Oily Pollutant Transport)
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB93-212371 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 11/22/1993
Collation 16p
Abstract
The paper discusses vadose zone parameter estimation techniques that may be used in lieu of measured parameter values. In particular, two different data bases that provide generic parameter estimates are reviewed. The effects of parameter variability on vadose zone NAPL flow are illustrated through usage of the Kinematic Oily Pollutant Transport (KOPT) model. The model simulated a laboratory experiment where gasoline was released into a one-meter long chromatography column. The model input parameter were measured, and the position of the leading edge of the gasoline was recorded as a function of time from the experiment. Simulations that use measured or tabulated parameter sets were compared with the experimental data, which represents the correct response of the system to the gasoline input. To assess the impact of using tabulated parameters Monte Carlo simulations were performed using correlated parameter sets generated from the tabulations. These results show that wide distributions of the parameters are required to capture likely variability in input parameter values.