Record Display for the EPA National Library Catalog

RECORD NUMBER: 2 OF 3

OLS Field Name OLS Field Data
Main Title Low Flow Rate Laboratory Feeders for Agglomerative Particles.
Author Gullett, B. K. ; Gillis, G. R. ;
CORP Author Acurex Corp., Research Triangle Park, NC.;Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab.
Year Published 1987
Report Number EPA-68-02-3988; EPA/600/J-87/281;
Stock Number PB88-186705
Additional Subjects Sorbents ; Calcium hydroxides ; Chemical reactors ; Feeders ; Particles ; Air pollution control ; Laboratory equipment ; Flow rate ; Limestone ; Agglomeration ; Removal ; Flue gases ; Sulfur dioxide ; Injection ; Design criteria ; Boilers ; Reprints ; Low flow
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB88-186705 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. 09/04/1988
Collation 7p
Abstract
The paper describes two particle feeders (fluidizing and entrainment): one was developed by modifying a design used for coal dust suspensions, and the other was developed later in response to shortcomings of the initial system. The two feeders were tested and compared for their performance at feeding Ca(OH)2 sorbents. The development and operation of a particle feeder for laboratory-scale, gas/solid-flow reactors is crucial in many research efforts. On this small scale, it is particularly difficult to feed particles at high mass rates without quantities of carrier gas that disrupt the operation of the reactor. These problems have been encountered in research programs involving the injection of limestone-based sorbents into utility boilers for the removal of SO2. The injection systems for these reactors must be designed to minimize the effects of the sorbent carrier gas upon the simulated utility boiler environment.