Record Display for the EPA National Library Catalog

RECORD NUMBER: 7 OF 18

Main Title Environmental technology verification report removal of chemical contaminants in drinking water : Watts Premier Incorporated WP-4V drinking water treatment system / [electronic resource] :
CORP Author NSF International, Ann Arbor, MI.;National Risk Management Research Lab., Cincinnati, OH.
Publisher National Risk Management Research Laboratory, U.S. Environmental Protection Agency,
Year Published 2005
Report Number EPA/600/R-06/005
Stock Number PB2006-111251
Subjects Drinking water--Purification ; Water--Purification ; Groundwater--Pollution ; Technological innovations--Environmental aspects--United States
Additional Subjects Water treatment processes ; Chemical contaminants ; Drinking water ; Removal ; Reverse osmosis ; Membranes ; Carbon ; Filtration ; Benzene ; Chloroform ; Mercury ; Chemical analysis ; Potable water ; Water pollution sampling ; Testing ; Verification ; Technology assessment ; Environmental technology verification(ETV) report ; Watts Premier Inc
Internet Access
Description Access URL
http://www.epa.gov/etv/pubs/600r06005.pdf
Abstract http://www.epa.gov/nrmrl/pubs/600r06005/600r06005.htm
Verification statement http://www.epa.gov/etv/pubs/600r06005s.pdf
https://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=P1001PYL.PDF
Holdings
Library Call Number Additional Info Location Last
Modified		 Checkout
Status
NTIS  PB2006-111251 Some EPA libraries have a fiche copy filed under the call number shown. 07/26/2022
Collation 1 online resource ([54] p.) : ill., charts, digital, PDF file.
Abstract
The Watts Premier WP-4V POU drinking water treatment system was tested for removal of aldicarb, benzene, cadmium, carbofuran, cesium, chloroform, dichlorvos, dicrotophos, fenamiphos, mercury, mevinphos, oxamyl, strontium, and strychnine. The WP-4V employs a reverse osmosis (RO) membrane, a sediment filter, and activated carbon filters to treat drinking water. The system was first tested with only the RO membrane component in place. The target challenge concentration for each chemical for the RO membrane tests was 1 mg/L. Following the RO membrane challenges, the post-membrane carbon filter component was challenged alone with each chemical the RO membrane did not remove to below 30 mg/L. Based on this criterion, the carbon filter was challenged with benzene, chloroform and mercury. The target challenge concentration for the carbon filter tests was the maximum effluent level measured during the RO membrane tests.
Notes
Title from title screen (viewed on Dec. 20, 2010). "November 2005." "EPA/600/R-06/005." "NSF 05/12c/EPADWCTR." Includes bibliographical references (p. 31).