Record Display for the EPA National Library Catalog


Main Title Design scale-up suitability for air-stripping columns : [journal version] /
Author Wallman, Harold. ; Cummins, M.
Other Authors
Author Title of a Work
Cummins, Michael D.
CORP Author Environmental Protection Agency, Cincinnati, OH. Water Engineering Research Lab. ;Jacobson (Nathan L.) Associates, Chester, CT.
Publisher U.S Environmental Protection Agency, Water Engineering Research Laboratory,
Year Published 1986
Report Number EPA/600/M-86/028;
Stock Number PB87-119103
OCLC Number 635955230
Subjects Strippers (Chemical technology) ; Water--Purification
Additional Subjects Water pollution control ; Water supply ; Design ; Pilot plants ; Mass transfer ; Potable water ; Chlorine organic compounds ; Concentration(Composition) ; Column packings ; Columns(Process engineering) ; Ground water ; Air stripping ; Volatile organic compounds ; Ethylene/tetrachloro ; Ethylene/trichloro ; Ethylene/dichloro
Library Call Number Additional Info Location Last
ELBD RPS EPA 600-M-86-028 repository copy AWBERC Library/Cincinnati,OH 09/04/2018
NTIS  PB87-119103 Some EPA libraries have a fiche copy filed under the call number shown. 07/26/2022
Collation pages 74-78 : illustrations ; 28 cm
An investigation was conducted to determine the suitability of a design scale-up from pilot-scale to full-scale air-stripping columns used in the removal of volatile organic compounds from contaminated water supplies. Forty-eight experimental runs were made in packed columns of four different diameters (6, 12, 24, and 57 in.) at air-to-water ratios from 5:1 to 50:1. Water was used from the Village of Brewster, New York, well fields; this water was contaminated with tetrachlorethylene, trichloroethylene and cis-1,2 dichloroethylene. The experimental mass transfer coefficients were compared with values calculated from the Onda mass transfer coefficient model. Generally, the two values were in reasonably good agreement. Based on these results, it appears that the Onda model tends to give a conservative design for a full-scale system. Using a cost model developed by the U.S. Environmental Protection Agency (EPA), the 2-in. plastic TRI-PACKS (of the packing types tested) gave the most cost-effective design for a full-scale system. No operational problems were encountered during subfreezing weather other than rupture of some sample lines.
Distributed to depository libraries in microfiche. "October 1986." "EPA/600/M-86/028." Print reproduction.