||In-house test program report no. 5 : hot soak temperature constraints /
||Environmental Protection Agency, Ann Arbor, Mich. Standards Development and Support Branch.
|| Standards Development and Support Branch, Emission Control Technology Division, Office of Mobile Source Air Pollution Control, Office of Air and Waste Management, U.S. Environmental Protection Agency,
||Evap 76-1; PB270688
Motor vehicles--Pollution control devices. ;
Test facilities ;
Automotive fuels ;
Air pollution ;
Temperature control ;
Fuel tanks ;
Sealed housing for evaporative determination ;
SHED testing ;
Hot soak tests ;
||EPA Evap 76-1
||NVFEL Library/Ann Arbor, MI
||Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy.
||1 v. (various pagings) : ill.
The goal of the in-house evaporative emission enclosure (SHED) testing is to develop a concise, accurate, and practical evaporative emission test procedure. One of the critical questions requiring evaluation is whether or not the enclosure method of testing for hot soak emissions presents abnormally high vehicle temperatures. In order to evaluate whether these temperatures do occur in the enclosure, hot soak tests were conducted in the enclosure and in the shop soak area and various temperatures were monitored. The objective of this study was to determine if a maximum enclosure ambient temperature should be specified for the hot soak test and to determine what a reasonable maximum temperature would be with respect to other phases of the test procedure. Also, temperatures near and on the surfaces of the inner and outer walls of the enclosure were measured.
Technical support report. "February, 1976." Includes bibliographical references. "PB 270 688." "Evap 76-1." Photocopy.