Record Display for the EPA National Library Catalog

RECORD NUMBER: 13 OF 26

OLS Field Name OLS Field Data
Main Title Evaluation of Boiler Design Modifications for Enhanced Limb Application.
Author Ryan, D. E. ; Smolenski, R. ;
CORP Author Babcock and Wilcox Co., Barberton, OH.;Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab.
Year Published 1987
Report Number EPA-68-02-4238; EPA/600/7-87/016;
Stock Number PB87-199634
Additional Subjects Air pollution control ; Emissions ; Sulfur oxides ; Nitrogen oxides ; Boilers ; Economic impact ; Cost analysis ; Pulverized fuels ; Combustion ; Sorbents ; LIMB(Limestone Injection Multistage Burner)
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB87-199634 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. 06/21/1988
Collation 94p
Abstract
The report gives results of a study to evaluate the technical and economic impact of designing wall-fired pulverized-coal units to incorporate dry-sorbent sulfur control technology (LIMB). Conventional (non-LIMB) units were set up in three sizes (200, 400, and 600 MW) to burn a low-sulfur (0.48%) subbituminous fuel. LIMB units were then set up to achieve 70% SOx removal using dry sorbent injection. Standard cost estimating procedures were used to evaluate the cost differentials between the conventional and LIMB units. These cost data were used to establish removal cost trends as a function of calcium-to-sulfur (Ca/S) mole ratios and boiler size. The study concluded that it is technically feasible to achieve 70% sulfur removal in a unit burning low-sulfur fuel using only dry sorbent injection. The results also showed that Ca/S ratios between 2.8 and 3.5 can be accommodated without radical alterations to state-of-the-art boiler configurations.