| Main Title |
Development of a pollution prevention factors methodology based on life-cycle assessment : lithographic printing case study / |
| Author |
Tolle, D. A. ;
Vigon, B. W. ;
Becker, J. R. ;
Salem, M. A.
|
| Other Authors |
|
| CORP Author |
Battelle, Columbus, OH.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab. |
| Publisher |
Risk Reduction Engineering Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, |
| Year Published |
1994 |
| Report Number |
68-C0-0003; EPA/600/R-94/157; PB95154878 |
| Stock Number |
PB95-154878 |
| OCLC Number |
31929664 |
| Subjects |
Pollution ;
Pollution control industry ;
Lithography--Environmental aspects ;
Printing--Environmental aspects
|
| Additional Subjects |
Lithography ;
Printing plates ;
Solvents ;
Raw materials ;
Case studies ;
Pollution abatement ;
Pollution control ;
Waste streams ;
Environmental impact assessments ;
Printing industry ;
Life cycle assessment ;
Pollution prevention
|
| Internet Access |
|
| Local Library Info |
| Library |
Local Subject |
Local Note |
| N/A |
Pollution prevention ; Solvent substitution--Environmental aspects ; Life-cycle assessment |
|
|
| Holdings |
| Library |
Call Number |
Additional Info |
Location |
Last
Modified |
Checkout
Status |
| EJBD ARCHIVE |
EPA 600-R-94-157 |
|
Headquarters Library/Washington,DC |
02/04/2011 |
| EJED |
EPA 600-R-94-157 |
|
OCSPP Chemical Library/Washington,DC |
10/05/2001 |
| ELBD |
EPA 600-R-94-157 |
|
AWBERC Library/Cincinnati,OH |
04/10/1998 |
| ESAD |
EPA 600-R-94-157 |
2 copies |
Region 10 Library/Seattle,WA |
06/02/2016 |
| NTIS |
PB95-154878 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
| Collation |
vii, 27 p. : ill., maps ; 28 cm. |
| Abstract |
Pollution Prevention (P2) factors are intended for use as general indicators of environmental improvement for the entire life-cycle that has occurred, or might be expected to occur, as a result of implementing a particular P2 activity. A preliminary methodology was developed using a streamlined life-cycle assessment (LCA) approach with the lithographic printing industy. Solvent substitution in blanket and press wash and waterless versus conventional dampening fountain system printing were scored and the P2 factors calculated. For solvent substitution, no apparent increase or decrease in environmental impact was indicated for three different solvents. However, waterless printing showed approximately a 25% decrease in impacts over the conventional system. |
| Notes |
"EPA/600/R-94/157." "January 1994." "EPA Contract No. 68-C0-0003." "Work Assignment 3-47." "The information in this document has been funded wholly or in part by the United States Environmental Protection Agency under Contract 68-C0-0003 to Battelle." Includes bibliographical references: p. 27. |
