Main Title |
National Emission Standards for Hazardous Air Pollutants (NESHAP) for integrated iron and steel plants : background information for proposed standards. |
Other Authors |
|
CORP Author |
Environmental Protection Agency, Research Triangle Park, NC. Office of Air Quality Planning and Standards. |
Publisher |
U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards, Metals Group, |
Year Published |
2001 |
Report Number |
EPA-453/R-01-005 |
Stock Number |
PB2001-107481 |
OCLC Number |
47705903 |
Subjects |
Air--Pollution--Standards--United States ;
Steel-works--Environmental aspects--United States ;
Steel-works--United States--Design and construction ;
Iron-works--Environmental aspects--United States ;
Iron-works--United States--Design and construction ;
Steel-works--Design and construction
|
Additional Subjects |
Iron and steel plants ;
Air pollution control ;
State regulations ;
Emission controls ;
Environmental impacts ;
Sinter plants ;
Standards ;
Blast furnaces ;
Basic oxygen process furnaces ;
National Emission Standards for Hazardous Air Pollutants(NESHAP) ;
Industry overviews ;
Baseline emissions ;
MACT standards
|
Internet Access |
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
EKBD |
EPA-453/R-01-005 |
|
Research Triangle Park Library/RTP, NC |
08/10/2001 |
ELBD ARCHIVE |
EPA 453-R-01-005 |
Received from HQ |
AWBERC Library/Cincinnati,OH |
10/04/2023 |
ELBD ARCHIVE |
EPA 453-R-01-005 |
|
AWBERC Library/Cincinnati,OH |
06/28/2022 |
NTIS |
PB2001-107481 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
1 volume (various pagings) : illustrations ; 28 cm |
Abstract |
This document summarizes the basic background information used in the development of MACT standards for the integrated iron and steel manufacturing source category. All references cited in this document are available in Docket No. A-2000-44. In addition, this document is supplemented by technical memoranda to the docket to document those steps in the standards development process not covered within this compilation of background information. The balance of chapter 1 summarizes the statutory basis for MACT standards and the selection of the source category. Chapter 2 provides an overview of the industry. Chapter 3 discusses the processes in detail and provides estimates of baseline emissions for each process. Emission control technologies and their performance are summarized in Chapter 4. Chapter 5 presents the determination of the MACT floor. Model plants are developed in Chapter 6 (for use in estimating potential impacts), and options for emission control and monitoring are discussed. Environmental and energy impacts are estimated for the model plants and for all plants nationwide in Chapter 7. The estimated costs for emission control and monitoring are given in Chapter 8. Appendix A summarizes the emissions data and Appendix B documents the information used to develop the MACT floor. |
Notes |
EPA project officer: Phil Mulrine. "Author(s): Marvin Branscome, Stacey Molinich, and Phil Mulrine"--Technical rep. data Prepared by Research Triangle Institute. Contract Number: 68-D6-0014 "January 2001." Final report. Includes bibliographical references. "EPA-453/R-01-005." |