||Ductile-to-Brittle Transition Time in Polyethylene Geomembrane Sheet.
Halse, Y. H. ;
Lord, A. E. ;
Koerner, R. M. ;
||Drexel Univ., Philadelphia, PA. Geosynthetic Research Inst.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
Geotechnical fabrics ;
Mechanical tests ;
Yield strength ;
Mechanical properties ;
Crack propagation ;
||Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy.
The susceptibility of polyehtylene (PE) geomembranes to stress cracking was evaluated in the laboratory using an accelerated notched constant load testing (NCLT) method. The test specimens were subjected to various stress levels which ranged from 25% to 70% of the yield stress at 50C. The ductile-to-brittle failure curves of five different geomembranes were obtained by plotting the logarithm of percent yield stress against the logarithm of average failure time. The stress cracking resistance (SCR) is quantified as the value of the ductile-to-brittle transition time. The results show that SCR of these geomembrane sheets vary over a wide range from a minimum of 4 hours to over 600 hours.