Record Display for the EPA National Library Catalog
RECORD NUMBER: 6 OF 18
|OLS Field Name||OLS Field Data|
|Main Title||Residential wood combustion study : task 5. emissions testing of wood stoves : volumes 3 & 4 (appendices) : final report /|
|CORP Author||Del Green Associates. Environmental Technology Division.|
|Publisher||Del Green Associates, Environmental Technology Division,|
|Report Number||Report no. EPA 910/9-82-089h.; EPA-68-02-3566|
|Subjects||Fuelwood--Environmental aspects--United States. ; Air quality management. ; Stoves, Wood.|
|Additional Subjects||Wood ; Residential buildings ; Air pollution ; Stoves ; Firewood ; Combustion products ; Heating systems ; Aromatic polycyclic hydrocarbons ; Sampling ; Hydrocarbon ; Concentration(Composition) ; Sites ; Trace elements ; Particles ; Sources ; Chemical analysis ; Carbon 14 ; Opacity ; Carbon monoxide ; Carbon dioxide ; Oxygen ; Air quality ; Pacific northwest region(United States) ; Air pollution sampling ; Air pollution detection ; Wood stoves ; Wood burning furnaces ; Chemical mass balance ; State of the art ; Indoor air pollution ; Smoke|
|Collation||353 pages in various pagings : chiefly illustrations, forms|
This report contains the appendices for the results of 19 emission tests on four wood stoves and two retrofit emission control devices (reported in PB84-170638). The objectives of the study were to further identify the effect of wood moisture on stove emissions, to evaluate several inexpensive (simplified) test procedures for assessing particulate emissions, and to define a level of particulate emissions which can be expected from state-of-the-art improved combustion stoves. This study included evaluating previous test data reported in the literature. A single standard operating procedure was used throughout the test program, the objective of which was to maintain a constant heat output rate, as monitored by combustion chamber temperature and stove surface temperature. A heat output rate corresponding to a relatively moderate to low burn rate (less than 2.5 kg wood/hour) was chosen. A single wood type (Douglas fir) was used throughout the study; wood size was maintained at a consistent level. Throughout the entire test program measurements were made for particulate, carbon monoxide, carbon dioxide, oxygen, and hydrocarbon content of the emissions; the gaseous constituents were monitored continuously. Measurements were made for creosote deposition, opacity, and smoke spot density.
"November 1982." Tables. "Report no. EPA 910/9-82-089h" Microfiche.