Main Title |
Development document for effluent limitations guidelines and new source performance standards : for the copper, nickel, chromium, and zinc segment of the electroplating point source category / |
Author |
Krickenberger., Kit R.
|
Other Authors |
|
CORP Author |
United States. Environmental Protection Agency. |
Publisher |
Effluent Guidelines Division, Office of Air and Water Programs, U.S. Environmental Protection Agency : U.S. Government Printing Office, distributor, |
Year Published |
1974 |
Report Number |
EPA/440-1-74-003a |
Stock Number |
PB-238 834 |
OCLC Number |
01151850 |
Subjects |
Electroplating--Waste disposal--Standards--United States ;
Factory and trade waste ;
Water--Pollution
|
Additional Subjects |
Industrial waste treatment ;
Electroplating ;
Metal finishing ;
Operating costs ;
Capitalized costs ;
Performance standards ;
Water pollution ;
Cost estimates ;
Process charting ;
Copper ;
Nickel ;
Chromium ;
Industrial wastes ;
Economic analysis ;
Zinc ;
Water pollution control ;
Water pollution standards ;
Best technology
|
Internet Access |
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
EJAD |
EPA 440/1-74-003a |
|
Region 3 Library/Philadelphia, PA |
09/29/1995 |
EJBD |
EPA 440-1-74-003a |
|
Headquarters Library/Washington,DC |
11/25/2013 |
ELBD ARCHIVE |
EPA 440-1-74-003a |
Received from HQ |
AWBERC Library/Cincinnati,OH |
10/04/2023 |
NTIS |
PB-238 834 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
xiii, 214 pages : illustrations, diagrams, charts ; 27 cm |
Abstract |
This document presents the findings of an extensive study of the electroplating industry by the Environmental Protection Agency for the purpose of developing effluent limitations guidelines, standards of performance, and pretreatment standards for the industry to implement Sections 304(b) and 306 of the 'Act.' Effluent limitations guidelines for the copper, nickel, chromium, and zinc segment contained herein set forth the degree of effluent reduction attainable through the application of the best practicable control technology currently available and the degree of effluent reduction attainable through the application of the best available technology economically achievable which must be achieved by existing point sources by July 1, 1977 and July 1, 1983, respectively. Supportive data and rationale for development of the proposed effluent limitations guidelines and standards of performance are contained in this report. Also discussed are processes, wastes, control technology, and costs. |
Notes |
"EPA/440-1-74-003a." Includes bibliographical references (pages 199-202). "March 1974." |
Contents Notes |
This document presents the findings of an extensive study of the electroplating industry by the Environmental Protection Agency for the purpose of developing effluent limitations guidelines, standards of performance, and pretreatment standards for th eindustry to implement Sections 304(b) and 306 of the "Act." Effluent limitations guidelines for the copper, nickel, chromium, and zinc segment contained herein set forth the degree of effluent reduction attainable through the application of the best practicable control technology currently available and the degree of effluent reduction attainable through the application of the best available technology economically achievable which must be achieved by existing point sources by July 1, 1977 and July 1, 1983, respectively. The standards of performance for new sources contained herein set forth the degree of effluent reduction which is achievable through the application of the best available demonstrated control technology, processes, operating methods, or other alternatives. The proposed regulations for all three levels of technology set forth above are presented in Section II, RECOMMENDATIONS. Supportive data and rationale for development of the proposed effluent limitations guidelines and standards of performance are contained in this report. |