Record Display for the EPA National Library Catalog


OLS Field Name OLS Field Data
Main Title Environmental Technology Verification Report: Baghouse Filtration Products TTG Inc. TG800 Filtration Media (Tested August 2012), (PB2013-111695).
CORP Author RTI International, Research Triangle Park, NC.; ETS, Inc., Roanoke, VA.; Environmental Protection Agency, Research Triangle Park, NC. National Risk Management Research Lab.
Year Published 2013
Report Number EPA/600/R-12/733
Stock Number PB2013-111695
Additional Subjects Baghouse filtration products ; Filtration media ; Environmental technology ; Verification report ; Air pollution control technology ; Fine-particle emissions ; Environmental Technology ; Environmental Technology Verification(ETV)
Library Call Number Additional Info Location Last
NTIS  PB2013-111695 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. 01/17/2014
Collation 25p
The Air Pollution Control Technology Center (APCT Center) is operated by RTI International (RTI), in cooperation with EPAs National Risk Management Research Laboratory (NRMRL). The APCT Center evaluates the performance of baghouse filtration products (BFPs) used primarily to control PM2.5 emissions (i.e., particles 2.5 im and smaller in aerodynamic diameter). This verification statement summarizes the test results for TTG Inc.s TG100 filtration media. The protocol is based on and describes modifications to the equipment and procedures described in Verein Deutscher Ingenieure (VDI) 3926, Part 2, Testing of Filter Media for Cleanable Filters under Operational Conditions, December 1994. The VDI document is available from Beuth Verlag GmbH, 10772 Berlin, Germany. The protocol also includes requirements for quality management and QA, procedures for product selection, auditing of the test laboratories, and the test reporting format. Outlet particle concentrations from a test fabric were measured with an impactor equipped with appropriate substrates to filter and measure PM2.5 within the dust flow. Outlet particle concentrations were determined by weighing the mass increase of dust collected in each impactor filter stage and dividing by the gas volumetric flow through the impactor.