| Main Title |
Measurement of benzene emissions from a floating roof test tank / |
| Author |
Laverman, Royce J.
|
| Other Authors |
|
| Publisher |
U.S. Environmental Protection Agency, Office of Air, Noise and Radiation, Office of Air Quality Planning and Standards, |
| Year Published |
1979 |
| Report Number |
EPA-450/3-79-020 |
| OCLC Number |
45734788 |
| Subjects |
Benzene--Research ;
Air--Pollution--Measurement
|
| Internet Access |
|
| Local Library Info |
| Library |
Local Subject |
Local Note |
| EKB |
|
Copy 2 has handwritten note on cover: AIC Copy. |
|
| Holdings |
| Library |
Call Number |
Additional Info |
Location |
Last
Modified |
Checkout
Status |
| EJBD ARCHIVE |
EPA 450-3-79-020 |
|
Headquarters Library/Washington,DC |
05/12/2014 |
| EKBD |
EPA-450/3-79-020 |
c.2 |
Research Triangle Park Library/RTP, NC |
07/11/2019 |
| EKBD |
EPA-450/3-79-020 |
c.1 |
Research Triangle Park Library/RTP, NC |
07/11/2019 |
|
| Collation |
75, 16, [1] p. : ill. ; 28 cm. |
| Notes |
EPA project officer: Richard K. Burr. Prepared by Chicago Bridge & Iron Co., Research Department. "June 1979." Final report. Includes bibliographical references. "EPA-450/3-79-020." |
| Contents Notes |
This report describes benzene emission measurements which were performed on a 20 foot diameter floating roof tank under conditions of simulated variable wind speed. Three types of floating roofs were tested: (1) a contact type internal floating roof with a nonmetallic liquid mounted resilient foam primary seal and with a rim mounted flapper secondary seal; (2) a noncontact type internal floating roof with a shingle type primary and secondary seal; and (3) a double deck type external floating roof with a metallic shoe primary seal and a rim mounted flapper type secondary seal. Emissions for benzene product are compared with those where the product is a propane/normal octane mixture. |
