Grantee Research Project Results
This page provides links to non-EPA web sites that provide additonal information about mercury. You will leave the EPA.gov domain and enter another page with more information. EPA cannot attest to the accuracy of information on that non-EPA page. Providing links to a non-EPA Web site is not an endorsement of the other site or the information it contains by EPA or any of its employees. Also, be aware that the privacy protection provided on the EPA.gov domain, Privacy and Security Notice, may not be available at the external link.
U.S. Environmental Protection Agency
Office of Research and Development
National Center for Environmental Research
CLOSED - FOR REFERENCES PURPOSES ONLY
Source Attribution of Radiative Forcing in Chemical Transport Models
This is the initial announcement of this funding opportunity.
Funding Opportunity Number: EPA-G2011-ORD-A1
Catalog of Federal Domestic Assistance (CFDA) Number: 66.511
Solicitation Opening Date: March 14, 2011
Solicitation Closing Date: June 8, 2011 11:59:59 pm Eastern Time
Eligibility Contact: James Gentry (gentry.james@epa.gov); phone: 703-347-8093
Electronic Submissions: Ron Josephson (josephson.ron@epa.gov); phone: 703-308-0442
Technical Contacts: John Dawson (dawson.john@epa.gov); phone: 703-347-8109 and
Rob Pinder (pinder.rob@epa.gov); phone: 919-541-3731
Access Standard Forms (https://www.epa.gov/research-grants/funding-opportunities-how-apply-and-required-forms)
View research awarded under previous solicitations (https://cfpub.epa.gov/ncer_abstracts/index.cfm/fuseaction/recipients.archive/)
SUMMARY OF PROGRAM REQUIREMENTS
Synopsis of Program:
The U.S. Environmental Protection Agency (EPA), Office of Research and Development (ORD), is seeking applications proposing research on expanding adjoint methods in chemical transport models to account for source attribution of radiative forcing from short-lived climate forcers. Applications may address methods for tracking how emissions of aerosols and their precursors as well as precursors of tropospheric ozone affect radiative forcing and air quality.
Award Information:
Anticipated Type of Award: Cooperative agreement
Estimated Number of Awards: Approximately 1 award
Anticipated Funding Amount: Approximately $245,000 total
Potential Funding per Award: Up to a total of $245,000, including direct and indirect costs, with a maximum duration of 2 years.
Cost-sharing is not required. Proposals with budgets exceeding the total award limits will not be considered.
Eligibility Information:
Each State, territory and possession, and Tribal nation of the U.S., including the District of Columbia, public and private State universities and colleges, hospitals, laboratories, State and local government departments, other public or private nonprofit institutions, and in some cases, individuals or foreign entities who have demonstrated unusually high scientific ability. See full announcement for more details.
Application Materials:
To apply under this solicitation, use the application package available at Grants.gov (for further submission information see Section IV.E. “Submission Instructions and other Submission Requirements”). The necessary forms for submitting an application will be found on the National Center for Environmental Research (NCER) web site, https://www.epa.gov/research-grants/funding-opportunities-how-apply-and-required-forms. If your organization is not currently registered with Grants.gov, you need to allow approximately one week to complete the registration process. This registration, and electronic submission of your application, must be performed by an authorized representative of your organization.
If you do not have the technical capability to utilize the Grants.gov application submission process for this solicitation, call 1-800-490-9194 or send a webmail message to https://www.epa.gov/research-grants/forms/contact-us-about-research-grants at least 15 calendar days before the submission deadline to assure timely receipt of alternate submission instructions. In your message provide the funding opportunity number and title of the program, specify that you are requesting alternate submission instructions, and provide a telephone number, fax number, and an email address, if available. Alternate instructions will be e-mailed whenever possible. Any applications submitted through alternate submission methods must comply with all the provisions of this Request for Applications (RFA), including Section IV, and be received by the solicitation closing date identified above.
Agency Contacts:
Eligibility Contact: James Gentry (gentry.james@epa.gov); phone: 703-347-8093
Electronic Submissions: Ron Josephson (josephson.ron@epa.gov); phone: 703-308-0442
Technical Contacts: John Dawson (dawson.john@epa.gov); phone: 703-347-8109 and
Rob Pinder (pinder.rob@epa.gov); phone: 919-541-3731
I. FUNDING OPPORTUNITY DESCRIPTION
A. Introduction
The U.S. Environmental Protection Agency (EPA), Office of Research and Development (ORD), is seeking applications proposing research on expanding adjoint methods in chemical transport models to account for source attribution of radiative forcing from short-lived climate forcers. Applications may address methods for tracking how emissions of aerosols and their precursors as well as precursors of tropospheric ozone affect radiative forcing and air quality.
B. Background
The scientific links between anthropogenic emissions and a changing climate have been well established, and this changing climate has been linked to impacts on human health and welfare (US GCRP, 2009). Attributing these impacts to the sources of various greenhouse gases and short-lived climate forcers is a complex task that requires advancements in modeling capabilities.
Adding to the difficulty in attributing climatic impacts to sources is the fact that the impacts of climate change accumulate over many decades. Emissions, land use change, and other forcing agents on the climate system cannot be forecast over these time scales. The analyses of the Intergovernmental Panel on Climate Change have instead relied on scenarios, rough sketches of potential futures. From scenarios that lead to mitigated climate change, the scientific community can learn more about what emission reduction goals are needed to achieve a reduced level of climate change. Scenarios also include assumptions about future changes that can only be partially controlled by policy options, such as availability of natural resources, the pace of technological change, and global population migration. Robust policy options are those that achieve climate mitigation goals across a wide range of assumptions about the future. A key need is a set of modeling tools that can rapidly screen large numbers of scenarios to uncover robust options, isolate determining assumptions, and present trade-offs to decision makers.
Process-based, first-principle models alone are not ideally suited for this task. By their nature of comprehensively simulating the relevant processes, these models are computationally expensive. They do, however, strive to accurately capture the complex, non-linear relationship between anthropogenic activities and the environmental harms. Climate models and chemical transport models are no exception.
However, some first-principle models have been augmented to include on-line sensitivity calculations. Adjoint models allow the user to define a receptor and to calculate the sensitivity of the receptor to each model input. An adjoint chemical transport model could, for example, calculate the influence of each emission source in the domain on the aerosol concentration in one non-attainment area. In adjoint models, the receptor is defined by a cost function. This function can be as simple as the concentration in a single location, or it can be arbitrarily complex, such as the contribution to locations and times that exceed a concentration threshold.
The sensitivity values calculated by these adjoint models makes it possible to efficiently relate changes in emissions from individual sources to a change in short-lived climate forcers, such as tropospheric ozone and aerosols. These species impact air quality and have radiative forcing impacts. To better understand the latter, it is necessary to integrate the adjoint of a radiative transfer calculation into the chemical transport model. The development of such a model would allow rapid screening of large numbers of scenarios to uncover robust emissions options for simultaneously improving human health and mitigating climate change.
The specific Strategic Goal and Objective from the EPAs Strategic Plan that relate to this solicitation are:
Goal 4: Healthy Communities and Ecosystems, Objective 4.4: Enhance Science and Research
The EPAs Strategic Plan can be found at: http://nepis.epa.gov/Adobe/PDF/P1001IPK.PDF (184 pp, 9.33 M)
C. Authority and Regulations
The authority for this RFA and resulting awards is contained in the Clean Air Act, Section 103, 42 U.S.C. 7403.
For research with an international aspect, the above statutes are supplemented, as appropriate, by the National Environmental Policy Act, Section 102(2)(F).
Note that a project’s focus is to consist of activities within the statutory terms of EPA’s financial assistance authorities; specifically, the statute(s) listed above. Generally, a project must address the causes, effects, extent, prevention, reduction, and elimination of air pollution, water pollution, solid/hazardous waste pollution, toxic substances control, or pesticide control depending on which statute(s) is listed above. These activities should relate to the gathering or transferring of information or advancing the state of knowledge. Proposals should emphasize this “learning” concept, as opposed to “fixing” an environmental problem via a well-established method. Proposals relating to other topics which are sometimes included within the term “environment” such as recreation, conservation, restoration, protection of wildlife habitats, etc., must describe the relationship of these topics to the statutorily required purpose of pollution prevention and/or control.
Applicable regulations include: 40 CFR Part 30 (Uniform Administrative Requirements for Grants and Agreements with Institutions of Higher Education, Hospitals, and Other Non-Profit Organizations), 40 CFR Part 31 (Uniform Administrative Requirements for Grants and Cooperative Agreements to State and Local Governments) and 40 CFR Part 40 (Research and Demonstration Grants). Applicable OMB Circulars include: OMB Circular A-21 (Cost Principles for Educational Institutions) relocated to 2 CFR Part 220 (http://www.access.gpo.gov/nara/cfr/waisidx_08/2cfr220_08.html), OMB Circular A-87 (Cost Principles for State, Local and Indian Tribal Governments) relocated to 2 CFR Part 225 (http://www.access.gpo.gov/nara/cfr/waisidx_10/2cfr225_10.html), OMB Circular A-102 (Grants and Cooperative Agreements With State and Local Governments), OMB Circular A-110 (Uniform Administrative Requirements for Grants and Other Agreements with Institutions of Higher Education, Hospitals and Other Non-Profit Organizations) relocated to 2 CFR Part 215 (http://www.access.gpo.gov/nara/cfr/waisidx_08/2cfr215_08.html), and OMB Circular A-122 (Cost Principles for Non-Profit Organizations) relocated to 2 CFR Part 230 (http://www.access.gpo.gov/nara/cfr/waisidx_07/2cfr230_07.html).
D. Specific Research Areas of Interest/Expected Outputs and Outcomes
Note to applicant: The term “output” means an environmental activity or effort, and associated work products, related to a specific environmental goal(s), (e.g., testing a new methodology), that will be produced or developed over a period of time under the agreement. The term “outcome” means the result, effect, or consequence that will occur from the above activit(ies) that is related to an environmental, behavioral, or health-related objective.
The Agency is soliciting research that advances scientific methods for tracking the sources of short-lived climate forcers in global chemical transport models. Proposals should address how adjoint methods in global chemical transport models can be extended to account for radiative forcing from tropospheric ozone and aerosols. In addition, proposals should address one of the following research questions:
- What would be the impacts on air quality and radiative forcing of short-lived climate forcers under various emission scenarios?
- How can space-based measurements of radiation and concentration be used to evaluate and constrain global chemical transport models?
Outputs of the proposed project could include reports, presentations, and peer-reviewed journal publications describing new methods for modeling short-lived climate forcers. An anticipated outcome of the research is enhanced ability for the scientific community to model and track emissions and impacts of short-lived climate forcers and their precursors.
E. References
United States Global Change Research Program (US GCRP), Global Climate Change Impacts in the United States, Cambridge University Press, New York (2009). Available at: http://globalchange.gov/publications/reports/scientific-assessments/us-impacts/download-the-report
F. Special Requirements
Agency policy and ethical considerations prevent EPA technical staff and managers from providing applicants with information that may create an unfair competitive advantage. Consequently, EPA employees will not review, comment, advise, and/or provide technical assistance to applicants preparing applications in response to EPA RFAs. EPA employees cannot endorse any particular application.
Multiple Investigator applications may be submitted as: (1) a single Lead Principal Investigator (PI) application with Co-PI(s) or (2) a Multiple PI application (with a single Contact PI). If you choose to submit a Multiple PI application, you must follow the specific instructions provided in Sections IV. and V. of this RFA. For further information, please see the EPA Implementation Plan for Policy on Multiple Principal Investigators (http://rbm.nih.gov/toolkit.htm).
These awards may involve the collection of “Geospatial Information,” which includes information that identifies the geographic location and characteristics of natural or constructed features or boundaries on the Earth or applications, tools, and hardware associated with the generation, maintenance, or distribution of such information. This information may be derived from, among other things, a Geographic Positioning System (GPS), remote sensing, mapping, charting, and surveying technologies, or statistical data.
It is anticipated that a total of approximately $245,000 will be awarded under this announcement, depending on the availability of funds and quality of applications received. The EPA anticipates funding approximately 1 award under this RFA. Requests for amounts in excess of a total of $245,000, including direct and indirect costs, will not be considered. The total project period requested in an application submitted for this RFA may not exceed 2 years.
The EPA reserves the right to reject all applications and make no awards, or make fewer awards than anticipated, under this RFA. The EPA reserves the right to make additional awards under this announcement, consistent with Agency policy, if additional funding becomes available after the original selections are made. Any additional selections for awards will be made no later than six months after the original selection decisions.
EPA will award a cooperative agreement under this announcement.
Where appropriate, based on consideration of the nature of the proposed project relative to the EPAs intramural research program and available resources, the EPA may award a cooperative agreement under this announcement. When addressing a research question/problem of common interest, collaborations between EPA scientists and the institutions principal investigators are permitted under a cooperative agreement. These collaborations may include data and information exchange, providing technical input to experimental design and theoretical development, coordinating extramural research with in-house activities, the refinement of valuation endpoints, and joint authorship of journal articles on these activities. Proposals may not identify EPA cooperators or interactions; specific interactions between EPAs investigators and those of the prospective recipient for cooperative agreements will be negotiated at the time of award.
A. Eligible Applicants
Each State, territory and possession, and Tribal nation of the U.S., including the District of Columbia, public and private State universities and colleges, hospitals, laboratories, State and local government departments, other public or private nonprofit institutions, and in some cases, individuals or foreign entities who have demonstrated unusually high scientific ability.
Potential applicants who are uncertain of their eligibility should contact James Gentry (gentry.james@epa.gov) in NCER, phone 703-347-8093.
B. Cost-Sharing
Institutional cost-sharing is not required.
C. Other
Applications must substantially comply with the application submission instructions and requirements set forth in Section IV of this announcement or they will be rejected. In addition, where a page limitation is expressed in Section IV with respect to parts of the application, pages in excess of the page limit will not be reviewed. Applications must be submitted through grants.gov or by other authorized alternate means (see Section IV.E. “Submission Instructions and Other Submission Requirements” for further information) on or before the solicitation closing date and time in Section IV of this announcement or they will be returned to the sender without further consideration. Also, applications exceeding the funding limits or project period term described herein will be returned without review. Further, applications that fail to demonstrate a public purpose of support or stimulation (e.g., by proposing research which primarily benefits a Federal program or provides a service for a Federal agency) will not be funded.
Applications deemed ineligible for funding consideration will be notified within fifteen calendar days of the ineligibility determination.
IV. APPLICATION AND SUBMISSION INFORMATION
Formal instructions for submission through Grants.gov follow in Section E.
A. Internet Address to Request Application Package
Use the application package available at Grants.gov (see Section E. “Submission Instructions and Other Submission Requirements”). Note: With the exception of the current and pending support form (available at https://www.epa.gov/research-grants/funding-opportunities-how-apply-and-required-forms), all necessary forms are included in the electronic application package.
An email will be sent by NCER to the Lead/Contact PI and the Administrative Contact (see below) to acknowledge receipt of the application and transmit other important information. The email will be sent from receipt.application@epa.gov; emails to this address will not be accepted. If you do not receive an email acknowledgment within 30 days of the submission closing date, immediately inform the Eligibility Contact shown in this solicitation. Failure to do so may result in your application not being reviewed. See Section E. “Submission Instructions and Other Submission Requirements” for additional information regarding the application receipt acknowledgment.
B. Content and Form of Application Submission
The application is made by submitting the materials described below. Applications must contain all information requested and be submitted in the formats described.
- Standard Form 424
The applicant must complete Standard Form 424. Instructions for completion of the SF424 are included with the form. (However, note that EPA requires that the entire requested dollar amount appear on the 424, not simply the proposed first year expenses.) The form must contain the signature of an authorized representative of the applying organization.
Applicants are required to provide a "Dun and Bradstreet Data Universal Numbering System" (DUNS) number when applying for federal grants or cooperative agreements. Organizations may receive a DUNS number by calling 1-866-705-5711 or by visiting the web site at http://www.dnb.com.
Executive Order 12372, "Intergovernmental Review of Federal Programs," does not apply to the Office of Research and Development's research and training programs unless EPA has determined that the activities that will be carried out under the applicants' proposal (a) require an Environmental Impact Statement (EIS), or (b) do not require an EIS but will be newly initiated at a particular site and require unusual measures to limit the possibility of adverse exposure or hazard to the general public, or (c) have a unique geographic focus and are directly relevant to the governmental responsibilities of a State or local government within that geographic area.
If EPA determines that Executive Order 12372 applies to an applicant's proposal, the applicant must follow the procedures in 40 CFR Part 29. The applicant must notify their state's single point of contact (SPOC). To determine whether their state participates in this process, and how to comply, applicants should consult http://www.whitehouse.gov/omb/grants_spoc/. If an applicant is in a State that does not have a SPOC, or the State has not selected research and development grants for intergovernmental review, the applicant must notify directly affected State, area wide, regional and local entities of its proposal.
EPA will notify the successful applicant(s) if Executive Order 12372 applies to its proposal prior to award.
- Key Contacts
The applicant must complete the "Key Contacts" form found in the Grants.gov application package. An "Additional Key Contacts" form is also available at https://www.epa.gov/research-grants/funding-opportunities-how-apply-and-required-forms. The Key Contacts form should also be completed for major sub-agreements (i.e., primary investigators). Do not include information for consultants or other contractors. Please make certain that all contact information is accurate.
For Multiple PI applications: The Additional Key Contacts form must be completed (see Section I.F. for further information). Note: The Contact PI must be affiliated with the institution submitting the application. EPA will direct all communications related to scientific, technical, and budgetary aspects of the project to the Contact PI; however, any information regarding an application will be shared with any PI upon request. The Contact PI is to be listed on the Key Contact Form as the Project Manager/Principal Investigator (the term Project Manager is used on the Grants.gov form, the term Principal Investigator is used on the form located on NCER's web site). For additional PIs, complete the Major Co-Investigator fields and identify PI status next to the name (e.g., "Name: John Smith, Principal Investigator").
- Table of Contents
Provide a list of the major subdivisions of the application indicating the page number on which each section begins.
- Abstract (1 page)
The abstract is a very important document in the review process. Therefore, it is critical that the abstract accurately describes the research being proposed and conveys all the essential elements of the research. Also, the abstracts of applications that receive funding will be posted on the EPA/ORD web site.
The abstract should include the information described below (a-h). Examples of abstracts for current grants may be found on the EPA/ORD web site.
- Funding Opportunity Title and Number for this proposal.
- Project Title: Use the exact title of your project as it appears in the application. The title must be brief yet represent the major thrust of the project. Because the title will be used by those not familiar with the project, use more commonly understood terminology. Do not use general phrases such as "research on."
- Investigators: For applications with multiple investigators, state whether this is a single Lead PI (with co-PIs) or Multiple PI application (see Section I.F.). For Lead PI applications, list the Lead PI, then the name(s) of each co-PI who will significantly contribute to the project. For Multiple PI applications, list the Contact PI, then the name(s) of each additional PI. Provide a web site URL or an email contact address for additional information.
- Institution: In the same order as the list of investigators, list the name, city and state of each participating university or other applicant institution. The institution applying for assistance must be clearly identified.
- Project Period and Location: Show the proposed project beginning and ending dates and the geographical location(s) where the work will be conducted.
- Project Cost: Show the total dollars requested from the EPA (include direct and indirect costs for all years).
- Project Summary: Provide three subsections addressing: (1) the objectives of the study (including any hypotheses that will be tested), (2) the experimental approach to be used (a description of the proposed project), and (3) the expected results (outputs/outcomes) of the project and how it addresses the research needs identified in the solicitation, including the estimated improvement in risk assessment or risk management that will result from successful completion of the proposed work.
- Supplemental Keywords: Without duplicating terms already used in the text of the abstract, list keywords to assist database searchers in finding your research. A list of suggested keywords may be found at: https://www.epa.gov/research-grants/funding-opportunities-how-apply-and-required-forms.
- Research Plan, Quality Assurance Statement, and References
- Research Plan (15 pages)
Applications should focus on a limited number of research objectives that adequately and clearly demonstrate that they meet the RFA requirements. Explicitly state the main hypotheses that you will investigate, the data you will create or use, the analytical tools you will use to investigate these hypotheses or analyze these data, and the results you expect to achieve. Research methods must be clearly stated so that reviewers can evaluate the appropriateness of your approach and the tools you intend to use. A statement such as: "we will evaluate the data using the usual statistical methods" is not specific enough for peer reviewers.
This description must not exceed fifteen (15) consecutively numbered (bottom center), 8.5x11-inch pages of single-spaced, standard 12-point type with 1-inch margins. While these guidelines establish the minimum type size requirements, applicants are advised that readability is of paramount importance and should take precedence in selection of an appropriate font for use in the proposal.
The description must provide the following information:
- Objectives: List the objectives of the proposed research and the hypotheses being tested during the project, and briefly state why the intended research is important and how it fulfills the requirements of the solicitation. This section should also include any background or introductory information that would help explain the objectives of the study. If this application is to expand upon research supported by an existing or former assistance agreement awarded under an EPA/ORD program, indicate the number of the agreement and provide a brief report of progress and results achieved under it.
- Approach/Activities: Outline the research design, methods, and techniques that you intend to use in meeting the objectives stated above.
- Expected Results, Benefits, Outputs, and Outcomes: Describe the results you expect to achieve during the project (outputs) and the potential benefits of the results (outcomes). This section should also discuss how the research results will lead to solutions to environmental problems and improve the public's ability to protect the environment and human health. A clear, concise description will help ORD and peer reviewers understand the merits of the research.
- General Project Information: Discuss other information relevant to the potential success of the project. This should include facilities, personnel expertise/experience, project schedules with associated milestones and target dates, proposed management, interactions with other institutions, etc. Applications for multi-investigator projects must identify project management and the functions of each investigator in each team and describe plans to communicate and share data.
- Appendices may be included but must remain within the 15-page limit.
- Quality Assurance Statement (3 pages)
For projects involving environmental data collection or processing, conducting surveys, modeling, method development, or the development of environmental technology (whether hardware-based or via new techniques), provide a Quality Assurance Statement (QAS) regarding the plans for processes that will be used to ensure that the products of the research satisfy the intended project objectives. Follow the guidelines provided below to ensure that the QAS describes a system that complies with ANSI/ASQC E4, Specifications and Guidelines for Quality Systems for Environmental Data Collection and Environmental Technology Programs. Do not exceed three consecutively numbered, 8.5x11-inch pages of single-spaced, standard 12-point type with 1-inch margins.
NOTE: If selected for award, applicants will be expected to provide additional quality assurance documentation.
Address each applicable section below by including the required information, referencing the specific location of the information in the Research Plan, or explaining why the section does not apply to the proposed research. (Not all will apply.)
- Identify the individual who will be responsible for the quality assurance (QA) and quality control (QC) aspects of the research along with a brief description of this person's functions, experience, and authority within the research organization. Describe the organization's general approach for conducting quality research. (QA is a system of management activities to ensure that a process or item is of the type and quality needed for the project. QC is a system of activities that measures the attributes and performance of a process or item against the standards defined in the project documentation to verify that they meet those stated requirements.)
- Discuss project objectives, including quality objectives, any hypotheses to be tested, and the quantitative and/or qualitative procedures that will be used to evaluate the success of the project. Include any plans for peer or other reviews of the study design or analytical methods.
- Address each of the following project elements as applicable:
- Collection of new/primary data:
(Note: In this case the word "sample" is intended to mean any finite part of a statistical population whose properties are studied to gain information about the whole. If certain attributes listed below do not apply to the type of samples to be used in your research, simply explain why those attributes are not applicable.)- Discuss the plan for sample collection and analysis. As applicable, include sample type(s), frequency, locations, sample sizes, sampling procedures, and the criteria for determining acceptable data quality (e.g., precision, accuracy, representativeness, completeness, comparability, or data quality objectives).
- Describe the procedures for the handling and custody of samples including sample collection, identification, preservation, transportation, and storage, and how the accuracy of test measurements will be verified.
- Describe or reference each analytical method to be used, any QA or QC checks or procedures with the associated acceptance criteria, and any procedures that will be used in the calibration and performance evaluation of the analytical instrumentation.
- Discuss the procedures for overall data reduction, analysis, and reporting. Include a description of all statistical methods to make inferences and conclusions, acceptable error rates and/or power, and any statistical software to be used.
- Use of existing/secondary data (i.e., data previously collected for other purposes or from other sources):
- Identify the types of secondary data needed to satisfy the project objectives. Specify requirements relating to the type of data, the age of data, geographical representation, temporal representation, and technological representation, as applicable.
- Specify the source(s) of the secondary data and discuss the rationale for selection.
- Establish a plan to identify the sources of the secondary data in all deliverables/products.
- Specify quality requirements and discuss the appropriateness for their intended use. Accuracy, precision, representativeness, completeness, and comparability need to be addressed, if applicable.
- Describe the procedures for determining the quality of the secondary data.
- Describe the plan for data management/integrity.
- Method development:
(Note: The data collected for use in method development or evaluation should be described in the QAS as per the guidance in section 3A and/or 3B above.)Describe the scope and application of the method, any tests (and measurements) to be conducted to support the method development, the type of instrumentation that will be used and any required instrument conditions (e.g., calibration frequency), planned QC checks and associated criteria (e.g., spikes, replicates, blanks), and tests to verify the method's performance.
- Development or refinement of models:
(Note: The data collected for use in the development or refinement of models should be described in the QAS as per the guidance in section 3A and/or 3B above.)- Discuss the scope and purpose of the model, key assumptions to be made during development/refinement, requirements for code development, and how the model will be documented.
- Discuss verification techniques to ensure the source code implements the model correctly.
- Discuss validation techniques to determine that the model (assumptions and algorithms) captures the essential phenomena with adequate fidelity.
- Discuss plans for long-term maintenance of the model and associated data.
- Development or operation of environmental technology:
(Note: The data collected for use in the development or evaluation of the technology should be described in the QAS as per the guidance in section 3A and/or 3B above.)- Describe the overall purpose and anticipated impact of the technology.
- Describe the technical and quality specifications of each technology component or process that is to be designed, fabricated, constructed, and/or operated.
- Discuss the procedure to be used for documenting and controlling design changes.
- Discuss the procedure to be used for documenting the acceptability of processes and components, and discuss how the technology will be benchmarked and its effectiveness determined.
- Discuss the documentation requirements for operating instructions/guides for maintenance and use of the system(s) and/or process(s).
- Conducting surveys:
(Note: The data to be collected in the survey and any supporting data should be described in the QAS as per the guidance in section 3A and/or 3B above.)Discuss the justification for the size of the proposed sample for both the overall project and all subsamples for specific treatments or tests. Identify and explain the rational for the proposed statistical techniques (e.g., evaluation of statistical power).
- Collection of new/primary data:
- Discuss data management activities (e.g., record-keeping procedures, data-handling procedures, and the approach used for data storage and retrieval on electronic media). Include any required computer hardware and software and address any specific performance requirements for the hardware/software configuration used.
- References: References cited are in addition to other page limits (e.g. research plan, quality assurance statement, data plan).
- Research Plan (15 pages)
- Budget and Budget Justification
- Budget
Prepare a master budget table using "SF-424A Budget Information for Non-Construction Programs" (aka SF-424A), available in the Grants.gov electronic application package and also at https://www.epa.gov/research-grants/funding-opportunities-how-apply-and-required-forms. Only complete "Section B-Budget Categories". Provide the object class budget category (a. - k.) amounts for each budget year under the "Grant Program, Function or Activity" heading. Each column reflects a separate budget year. For example, Column (1) reflects budget year 1. The total budget will be automatically tabulated in column (5).
If a subaward, such as a subagreement with an educational institution is included in the application, provide a separate SF-424A and budget justification for the subaward. Include the total amount for the subaward under "Other" in the master SF-424A. Applicants may not use subagreements to transfer or delegate their responsibility for successful completion of their EPA assistance agreement. Therefore, EPA expects that subawards or subcontracts should not constitute more than 40% of the total direct cost of the total project budget. If a subaward/subcontract constitutes more than 40% of the total direct cost, additional justification may be required before award, discussing the need for the subaward/subcontract to accomplish the objectives of the research project. Please see Section IV. D below if your organization intends to identify specific contractors, including consultants, and subawardees in your proposal.
Please note that institutional cost-sharing is not required. However, if voluntary cost-sharing is proposed, a brief statement concerning cost-sharing should be added to the budget justification.
Please note that when formulating budgets for proposals/applications, applicants must not include management fees or similar charges in excess of the direct costs and indirect costs at the rate approved by the applicants cognizant audit agency, or at the rate provided for by the terms of the agreement negotiated with EPA. The term "management fees or similar charges" refers to expenses added to the direct costs in order to accumulate and reserve funds for ongoing business expenses, unforeseen liabilities, or for other similar costs that are not allowable under EPA assistance agreements. Management fees or similar charges may not be used to improve or expand the project funded under this agreement, except to the extent authorized as a direct cost of carrying out the scope of work.
- Budget Justification [2 pages in addition to the Section IV.B.5. page limitations, not including additions under Nos. (6) and (7) below to support contracts and subawards]
Describe the basis for calculating the personnel, fringe benefits, travel, equipment, supplies, contractual support, and other costs identified in the itemized budget. The budget justification should not exceed two consecutively numbered (bottom center), 8.5x11-inch pages of single-spaced, standard 12-point type with 1-inch margins.
Budget information should be supported at the level of detail described below:
- Personnel: List all staff positions by title. Give annual salary, percentage of time assigned to the project, and total cost for the budget period.
- Fringe Benefits: Identify the percentage used and the basis for its computation.
- Travel: Specify the estimated number of trips, locations, and other costs for each type of travel. Explain the need for any travel, paying particular attention to travel outside the United States. Include travel funds for annual program progress reviews (estimate for two days in Washington, D.C.) and a final workshop to report on results.
- Equipment: Identify all tangible, non-expendable personal property to be purchased that has an estimated cost of $5,000 or more per unit and a useful life of more than one year. (Personal property items with a unit cost of less than $5,000 are considered supplies.)
- Supplies: "Supplies" means tangible property other than "equipment." Identify categories of supplies to be procured (e.g., laboratory supplies or office supplies). Specifically identify computers to be purchased or upgraded.
- Contractual: Specify the amount you anticipate expending for services/analyses or consultants and specify the purpose of the contracts and estimated cost. Any procurement of services from individual consultants or commercial firms (including space for workshops) must comply with the competitive procurement requirements of 40 C.F.R. Part 30 or 40 C.F.R. 31.36, as appropriate. Please see Section IV. D below for more details.
- Other: List each item in sufficient detail for the EPA to determine the reasonableness of its cost relative to the research to be undertaken. Note that subawards, such as those with other universities for members of the research team, are included in this category. Subawards must have a separate itemized budget and budget justification, not to exceed one additional page each, included as part of the proposal. Subawards may not be used to acquire services from consultants or commercial firms. Please see Section IV. D below for more details.
- Indirect Costs: If indirect costs are included in the budget identify the cognizant federal audit agency and the approved indirect rate. If your organization does not have a cognizant federal audit agency, please note that in the proposal and provide a brief explanation for how you calculated your indirect cost rate. EPA will negotiate an indirect rate if necessary.
- Budget
- Resumes
Provide resumes for each investigator and important co-worker. You may include resumes from staff of subawardees such as universities. Do not include resumes of consultants or other contractors. The resume for each individual must not exceed two consecutively numbered (bottom center), 8.5x11-inch pages of single-spaced, standard 12-point type with 1-inch margins.
- Current and Pending Support
Complete a current and pending support form (provided at https://www.epa.gov/research-grants/funding-opportunities-how-apply-and-required-forms) for each investigator and important co-worker. Do not include current and pending support for consultants or other contractors. Include all current and pending research regardless of source.
Note to all prospective applicants requiring multiple Current and Pending Support Form pages: Due to a limitation in Adobe Acrobat's forms functionality, additional pages cannot be directly inserted into the original PDF form and preserve the form data on the subsequent pages. Multiple page form submissions can be created in Acrobat 8 and later using the "PDF Package" option in the "Create PDF from Multiple Files" function. If you have an earlier version of Adobe Standard or Professional, applicants will need to convert each PDF page of the form to an EPS (Encapsulated Post Script) file before creating the PDF for submission. The following steps will allow applicants with earlier versions of Adobe Standard or Professional to create a PDF package:
- Populate the first page of the PDF, and save it as a EPS (Encapsulated Post Script) file.
- Reopen the form, and populate it with the data for page 2. Save this page as a different EPS file. Repeat for as many pages as necessary.
- Use Acrobat Distiller to convert the EPS files back to PDF.
- Open Acrobat Professional, and combine the individual pages into a combined PDF file.
- Guidelines, Limitations, and Additional Requirements
- Letters of Intent/Letters of Support
Letters of intent to provide resources for the proposed research or to document intended interactions are limited to one brief paragraph committing the availability of a resource (e.g., use of a person's time or equipment) or intended interaction (e.g., sharing of data, as-needed consultation) that is described in the Research Plan. Letters of intent are to be included as an addition to the budget justification documents. EPA employees are not permitted to provide letters of intent for any application.
Letters of support do not commit a resource vital to the success of the proposal. A letter of support is written by businesses, organizations, or community members stating their support of the applicant's proposed project. EPA employees are not permitted to provide letters of support for any application.
Note: Letters of intent or support must be part of the application; letters submitted separately will not be accepted. Any letter of intent or support that exceeds one brief paragraph (excluding letterhead and salutations), is considered part of the Research Plan and is included in the 15-page Research Plan limit. Any transactions between the successful applicant and parties providing letters of intent or support financed with EPA grant funds are subject to the funding restrictions described in Section IV. D. as well.
- Funding Opportunity Number(s) (FON)
At various places in the application, applicants are asked to identify the FON.
The Funding Opportunity Number for this RFA is:
Source Attribution of Radiative Forcing in Chemical Transport Models, EPA-G2011-ORD-A1 - Confidentiality
By submitting an application in response to this solicitation, the applicant grants the EPA permission to make limited disclosures of the application to technical reviewers both within and outside the Agency for the express purpose of assisting the Agency with evaluating the application. Information from a pending or unsuccessful application will be kept confidential to the fullest extent allowed under law; information from a successful application may be publicly disclosed to the extent permitted by law.
In accordance with 40 CFR 2.203, applicants may claim all or a portion of their application/proposal package as confidential business information. EPA will evaluate confidentiality claims in accordance with 40 CFR Part 2. Applicants must clearly mark applications/proposals or portions thereof that they claim as confidential. If no claim of confidentiality is made, EPA is not required to make the inquiry to the applicant otherwise required by 40 CFR 2.204(c)(2) prior to disclosure. However, competitive proposals/applications are considered confidential and protected from disclosure prior to the completion of the competitive selection process.
- Letters of Intent/Letters of Support
C. Submission Dates and Times
Applications must be transferred to Grants.gov no later than 11:59:59 pm Eastern Time on the solicitation closing date. Applications transferred after the closing date and time will be returned to the sender without further consideration.
It should be noted that this schedule may be changed without prior notification because of factors not anticipated at the time of announcement. In the case of a change in the solicitation closing date, a new date will be posted on the NCER web site (http://epa.govhttps://www.epa.gov/research-grants/research-funding-opportunities>) and a modification posted on www.grants.gov.
Solicitation Closing Date: June 8, 2011 11:59:59 pm Eastern Time (applications must be submitted to Grants.gov by this time, see Section IV.E “Submission Instructions and Other Submission Requirements” for further information).
NOTE: Customarily, applicants are notified about evaluation decisions within six months of the solicitation closing date. Awards are generally made 9-12 months after the solicitation closing date.
D. Funding Restrictions
The funding mechanism for all awards issued under ORD solicitations will consist of assistance agreements from the EPA. All award decisions are subject to the availability of funds. In accordance with the Federal Grant and Cooperative Agreement Act, 31 U.S.C. 6301 et seq., the primary purpose of an assistance agreement is to accomplish a public purpose of support or stimulation authorized by federal statute, rather than acquisition for the direct benefit or use of the Agency. In issuing a grant, the EPA anticipates that there will be no substantial EPA involvement in the design, implementation, or conduct of the research. However, the EPA will monitor research progress through annual reports provided by grantees and other contacts, including site visits, with the Principal Investigator(s).
If you wish to submit applications for more than one funding opportunity you must ensure that the research proposed in each application is significantly different from any other that has been submitted to the EPA or from any other financial assistance you are currently receiving from the EPA or other federal government agency.
Collaborative applications involving more than one institution must be submitted as a single administrative package from one of the institutions involved.
EPA awards funds to one eligible applicant as the recipient even if other eligible applicants are named as partners or co-applicants or members of a coalition or consortium. The recipient is accountable to EPA for the proper expenditure of funds.
Funding may be used to provide subgrants or subawards of financial assistance, which includes using subawards or subgrants to fund partnerships, provided the recipient complies with applicable requirements for subawards or subgrants including those contained in 40 CFR Parts 30 or 31, as appropriate. Applicants must compete contracts for services and products, including consultant contracts, and conduct cost and price analyses to the extent required by the procurement provisions of the regulations at 40 CFR Parts 30 or 31, as appropriate. The regulations also contain limitations on consultant compensation. Applicants are not required to identify subawardees/subgrantees and/or contractors (including consultants) in their proposal/application. However, if they do, the fact that an applicant selected for award has named a specific subawardee/subgrantee, contractor, or consultant in the proposal/application EPA selects for funding does not relieve the applicant of its obligations to comply with subaward/subgrant and/or competitive procurement requirements as appropriate. Please note that applicants may not award sole source contracts to consulting, engineering or other firms assisting applicants with the proposal based solely on the firm's role in preparing the proposal/application.
Successful applicants cannot use subgrants or subawards to avoid requirements in EPA grant regulations for competitive procurement by using these instruments to acquire commercial services or products from for-profit organizations to carry out its assistance agreement. The nature of the transaction between the recipient and the subawardee or subgrantee must be consistent with the standards for distinguishing between vendor transactions and subrecipient assistance under Subpart B Section .210 of OMB Circular A-133, and the definitions of subaward at 40 CFR 30.2(ff) or subgrant at 40 CFR 31.3, as applicable. EPA will not be a party to these transactions. Applicants acquiring commercial goods or services must comply with the competitive procurement standards in 40 CFR Part 30 or 40 CFR Part 31.36 and cannot use a subaward/subgrant as the funding mechanism.
Section V of the announcement describes the evaluation criteria and evaluation process that will be used by EPA to make selections under this announcement. During this evaluation, except for those criteria that relate to the applicant's own qualifications, past performance, and reporting history, the review panel will consider, if appropriate and relevant, the qualifications, expertise, and experience of:
- an applicant's named subawardees/subgrantees identified in the proposal/application if the applicant demonstrates in the proposal/application that if it receives an award that the subaward/subgrant will be properly awarded consistent with the applicable regulations in 40 CFR Parts 30 or 31. For example, applicants must not use subawards/subgrants to obtain commercial services or products from for profit firms or individual consultants.
- an applicant's named contractor(s), including consultants, identified in the proposal/application if the applicant demonstrates in its proposal/application that the contractor(s) was selected in compliance with the competitive procurement standards in 40 CFR Part 30 or 40 CFR 31.36 as appropriate. For example, an applicant must demonstrate that it selected the contractor(s) competitively or that a proper non-competitive sole-source award consistent with the regulations will be made to the contractor(s), that efforts were made to provide small and disadvantaged businesses with opportunities to compete, and that some form of cost or price analysis was conducted. EPA may not accept sole source justifications for contracts for services or products that are otherwise readily available in the commercial marketplace.
EPA will not consider the qualifications, experience, and expertise of named subawardees/subgrantees and/or named contractor(s) during the proposal/application evaluation process unless the applicant complies with these requirements.
Each proposed project must be able to be completed within the project period and with the initial award of funds. Applicants should request the entire amount of money needed to complete the project. Recipients should not anticipate additional funding beyond the initial award of funds for a specific project.
E. Submission Instructions and Other Submission Requirements
Please read this entire section before attempting an electronic submission through Grants.gov.
If you do not have the technical capability to utilize the Grants.gov application submission process for this solicitation, call 1-800-490-9194 or send a webmail message to https://www.epa.gov/research-grants/forms/contact-us-about-research-grants at least 15 calendar days before the submission deadline to assure timely receipt of alternate submission instructions. In your message provide the funding opportunity number and title of the program, specify that you are requesting alternate submission instructions, and provide a telephone number, fax number, and an email address, if available. Alternate instructions will be e-mailed whenever possible. Any applications submitted through alternate submission methods must comply with all the provisions of this RFA, including Section IV, and be received by the solicitation closing date identified above.
Note: Grants.gov submission instructions are updated on an as-needed basis. Please provide your Authorized Organizational Representative (AOR) with a copy of the following instructions to avoid submission delays that may occur from the use of outdated instructions.
- Preparing for Submission. The appropriate electronic application package available through the Grants.gov site must be used for electronic submissions. To begin the application process, go to http://www.grants.gov
The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Conclusions drawn by the principal investigators have not been reviewed by the Agency.