Sustainable Erosion Control in Developing Countries Using Industrial By-ProductsEPA Grant Number: SU835079
Title: Sustainable Erosion Control in Developing Countries Using Industrial By-Products
Investigators: Chrysochoou, Maria
Current Investigators: Chrysochoou, Maria , Boyer, Dana , Cipoletti, Scott
Institution: University of Connecticut
EPA Project Officer: Lank, Gregory
Project Period: August 15, 2011 through August 14, 2012
Project Amount: $15,000
RFA: P3 Awards: A National Student Design Competition for Sustainability Focusing on People, Prosperity and the Planet (2011) RFA Text | Recipients Lists
Research Category: Pollution Prevention/Sustainable Development , P3 Challenge Area - Built Environment , P3 Awards , Sustainability
The objective of this proposal is to investigate the application of industrial by-products such as steel slag and cement kiln dust for erosion control in developing countries and to design and an apply a stabilization method for a road with severe erosion problems in La Prusia, Nicaragua.
Soil samples will be obtained from the road that connects La Prusia, a community with Nicaragua, with the city of Grenada and which becomes unusable every year to severe flooding and erosion. Waste samples from local cement and steel plants will also be acquired. The changes in mechanical properties (strength, erodiblity, hydraulic conductivity) in the soil-waste mixtures will be tested as a function of water content and mixing ratio, along with the environmental properties (contaminant concentration and leaching). The optimal mixes will then be applied in a test section of the road using local resources and erosion and leaching will be monitored in situ. The project will rely on the involvement of the local community with a design that can be implemented by them at very low cost compared to traditional erosion control practices. The construction of the road will significantly impact the local people, who rely on it for access to education, jobs and other infrastructure, but cannot afford to pave it. The project will also create a paradigm for sustainable construction in developing countries.
This project will develop a design for sustainable erosion control in developing countries that can be applied to any area with similar problems and characteristics. The success of the design will be measured by lab and field measurements of soil properties and by the overall success of the implementation of the field demonstration.