Development of an Environmentally Friendly and Economical Process for Plugging Abandoned Wells

EPA Grant Number: R827015C024
Subproject: this is subproject number 024 , established and managed by the Center Director under grant R827015
(EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).

Center: IPEC University of Tulsa (TU)
Center Director: Sublette, Kerry L.
Title: Development of an Environmentally Friendly and Economical Process for Plugging Abandoned Wells
Investigators: Shah, Subhash
Institution: University of Oklahoma
EPA Project Officer: Lasat, Mitch
Project Period:     (Extended to July 31, 2004)
RFA: Integrated Petroleum Environmental Consortium (IPEC) (1999) RFA Text |  Recipients Lists
Research Category: Hazardous Waste/Remediation , Targeted Research

Objective:

The purpose of this project is to verify that the use of fly ash instead of cement in the plugging of abandoned oil and gas wells, water wells and seismic holes is a viable option. Long-term objectives are to provide a cheaper, environmentally friendly, and more economical method of plugging wells. The objectives of Phase I of the project were to obtain the cementitious properties of Class C fly ash from five coal-fired power plants in Oklahoma and, utilizing these properties, to produce a fly ash grout similar to cement grout. Phase I has been completed in which the optimum fly ash slurry formulation was developed, tested, and compared with Class H cement. The results showed that the fly ash plug can be substituted for Class H cement for well plugging.

Phase II objective is to finalize the acceptability of fly ash slurry as plugging material. Additional laboratory tests are planned to further determine the quality and bond strength of fly ash grout. Furthermore, hydraulic bond strength tests and shear bond strength tests will also be conducted and they will be followed by actual field application tests. The optimization of placement technique will then be established for the achievement of high quality fly ash plugging for abandoned wells.

Publications and Presentations:

Publications have been submitted on this subproject: View all 6 publications for this subprojectView all 120 publications for this center

Supplemental Keywords:

RFA, Scientific Discipline, Water, TREATMENT/CONTROL, Sustainable Industry/Business, Wastewater, Sustainable Environment, Technology, Technology for Sustainable Environment, Civil/Environmental Engineering, Economics and Business, New/Innovative technologies, Engineering, Environmental Engineering, alternatives to concrete, plugging wells, industrial wastewater, cement alternative, green engineering, fly ash, petrochemicals, environmental sustainability, alternative materials, cost benefit, abandoned oil wells, environmentally benign alternative, innovative technologies

Progress and Final Reports:

  • 2000
  • 2001
  • 2002
  • 2003
  • Final Report

  • Main Center Abstract and Reports:

    R827015    IPEC University of Tulsa (TU)

    Subprojects under this Center: (EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
    R827015C001 Evaluation of Road Base Material Derived from Tank Bottom Sludges
    R827015C002 Passive Sampling Devices (PSDs) for Bioavailability Screening of Soils Containing Petrochemicals
    R827015C003 Demonstration of a Subsurface Drainage System for the Remediation of Brine-Impacted Soil
    R827015C004 Anaerobic Intrinsic Bioremediation of Whole Gasoline
    R827015C005 Microflora Involved in Phytoremediation of Polyaromatic Hydrocarbons
    R827015C006 Microbial Treatment of Naturally Occurring Radioactive Material (NORM)
    R827015C007 Using Plants to Remediate Petroleum-Contaminated Soil
    R827015C008 The Use of Nitrate for the Control of Sulfide Formation in Oklahoma Oil Fields
    R827015C009 Surfactant-Enhanced Treatment of Oil-Contaminated Soils and Oil-Based Drill Cuttings
    R827015C010 Novel Materials for Facile Separation of Petroleum Products from Aqueous Mixtures Via Magnetic Filtration
    R827015C011 Development of Relevant Ecological Screening Criteria (RESC) for Petroleum Hydrocarbon-Contaminated Exploration and Production Sites
    R827015C012 Humate-Induced Remediation of Petroleum Contaminated Surface Soils
    R827015C013 New Process for Plugging Abandoned Wells
    R827015C014 Enhancement of Microbial Sulfate Reduction for the Remediation of Hydrocarbon Contaminated Aquifers - A Laboratory and Field Scale Demonstration
    R827015C015 Locating Oil-Water Interfaces in Process Vessels
    R827015C016 Remediation of Brine Spills with Hay
    R827015C017 Continuation of an Investigation into the Anaerobic Intrinsic Bioremediation of Whole Gasoline
    R827015C018 Using Plants to Remediate Petroleum-Contaminated Soil
    R827015C019 Biodegradation of Petroleum Hydrocarbons in Salt-Impacted Soil by Native Halophiles or Halotolerants and Strategies for Enhanced Degradation
    R827015C020 Anaerobic Intrinsic Bioremediation of MTBE
    R827015C021 Evaluation of Commercial, Microbial-Based Products to Treat Paraffin Deposition in Tank Bottoms and Oil Production Equipment
    R827015C022 A Continuation: Humate-Induced Remediation of Petroleum Contaminated Surface Soils
    R827015C023 Data for Design of Vapor Recovery Units for Crude Oil Stock Tank Emissions
    R827015C024 Development of an Environmentally Friendly and Economical Process for Plugging Abandoned Wells
    R827015C025 A Continuation of Remediation of Brine Spills with Hay
    R827015C026 Identifying the Signature of the Natural Attenuation of MTBE in Goundwater Using Molecular Methods and "Bug Traps"
    R827015C027 Identifying the Signature of Natural Attenuation in the Microbial Ecology of Hydrocarbon Contaminated Groundwater Using Molecular Methods and "Bug Traps"
    R827015C028 Using Plants to Remediate Petroleum-Contaminated Soil: Project Continuation
    R827015C030 Effective Stormwater and Sediment Control During Pipeline Construction Using a New Filter Fence Concept
    R827015C031 Evaluation of Sub-micellar Synthetic Surfactants versus Biosurfactants for Enhanced LNAPL Recovery
    R827015C032 Utilization of the Carbon and Hydrogen Isotopic Composition of Individual Compounds in Refined Hydrocarbon Products To Monitor Their Fate in the Environment
    R830633 Integrated Petroleum Environmental Consortium (IPEC)
    R830633C001 Development of an Environmentally Friendly and Economical Process for Plugging Abandoned Wells (Phase II)
    R830633C002 A Continuation of Remediation of Brine Spills with Hay
    R830633C003 Effective Stormwater and Sediment Control During Pipeline Construction Using a New Filter Fence Concept
    R830633C004 Evaluation of Sub-micellar Synthetic Surfactants versus Biosurfactants for Enhanced LNAPL Recovery
    R830633C005 Utilization of the Carbon and Hydrogen Isotopic Composition of Individual Compounds in Refined Hydrocarbon Products To Monitor Their Fate in the Environment
    R830633C006 Evaluation of Commercial, Microbial-Based Products to Treat Paraffin Deposition in Tank Bottoms and Oil Production Equipment
    R830633C007 Identifying the Signature of the Natural Attenuation in the Microbial Ecology of Hydrocarbon Contaminated Groundwater Using Molecular Methods and “Bug Traps”
    R830633C008 Using Plants to Remediate Petroleum-Contaminated Soil: Project Continuation
    R830633C009 Use of Earthworms to Accelerate the Restoration of Oil and Brine Impacted Sites