Polymer-Based Competitive Flow Sensor Detects Contaminants in the Field

EPA Contract Number: 68D01059
Title: Polymer-Based Competitive Flow Sensor Detects Contaminants in the Field
Investigators: Coolbaugh, M. Todd
Small Business: American Research Corporation of Virginia
EPA Contact: Manager, SBIR Program
Phase: II
Project Period: September 1, 2001 through September 1, 2003
Project Amount: $225,000
RFA: Small Business Innovation Research (SBIR) - Phase II (2001) Recipients Lists
Research Category: Ecological Indicators/Assessment/Restoration , SBIR - Monitoring , Small Business Innovation Research (SBIR)

Description:

This Phase II project addresses the development of technology that would provide field-based quantitative detection of a wide range of environmental contaminants through the use of molecularly imprinted polymers and fluorescence detection. The proposed method would complement immunological methods of analysis that have been adapted to contaminants such as herbicides and pesticides. The well-documented advantages of these methods, including high sensitivity and selectivity and fairly low cost per analysis, are offset by a number of disadvantages. Antibodies have somewhat limited physical and chemical durability and cannot be used at elevated temperatures, beyond a fairly restricted pH range or in nonaqueous environments. In the Phase I program, American Research Corporation of Virginia developed a compact displacement flow sensor utilizing molecularly imprinted polymer (MIP) technology and diode laser-excited near-infrared fluorescence detection. In the Phase II program, work will be performed to optimize and field test the MIP sensor. The innovation of the Phase II program is the development and use of a new generation of biomimetic MIP to provide analyte selectivity and down-stream near-infrared fluorescence as a sensitive means of detection. Phase II also will address the selectivity of the MIP system. The Phase I results have shown that MIP specific for atrazine and 2,4-D can be conveniently prepared and processed. Methods were developed to fabricate rapidly interchangeable cartridges. A low-cost diode-laser based fluorimeter was developed and shown to be capable of extremely low detection limits and very stable operation. Synthetic strategies for preparing fluorophore labeled analyte molecules were developed. The Phase II technical objectives include the preparation of MIP and competition reagents and development of assay methodology optimized for environmental analysis, and fabrication extensive testing of the sensor system.

Successful completion of the Phase II program will result in a prototype MIP-based sensor system for use in field-based contaminant analysis. In addition, the resulting technology base will enable rapid development of MIP sensors with broad applications in environmental, food, chemical, and biomedical analyses to be commercialized during the Phase III commercialization program.

Supplemental Keywords:

small business, SBIR, molecularly imprinted polymers, pesticides, fluorescence, sensor, analytical, EPA., RFA, Scientific Discipline, Toxics, Air, Water, Ecosystem Protection/Environmental Exposure & Risk, Chemical Engineering, Environmental Chemistry, pesticides, Contaminant Candidate List, Chemistry, Monitoring/Modeling, Environmental Monitoring, Engineering, Environmental Engineering, Engineering, Chemistry, & Physics, molecularly imprinted polymers (MIP), flow sensor, fluorescence detection, environmental contaminants, atrazine, polymer-based flow sensor

Progress and Final Reports:

  • Final Report

  • SBIR Phase I:

    Polymer-Based Competitive Flow Sensor Detects Contaminants in the Field  | 2001 Progress Report  | Final Report