Grantee Research Project Results
Reduce Carbon Emissions by Wireless Power Transfer
EPA Grant Number: SU836793Title: Reduce Carbon Emissions by Wireless Power Transfer
Investigators: Lee, Hoseon
Institution: Kennesaw State University
EPA Project Officer: Page, Angela
Phase: I
Project Period: September 1, 2016 through August 31, 2017
Project Amount: $14,953
RFA: P3 Awards: A National Student Design Competition for Sustainability Focusing on People, Prosperity and the Planet (2016) RFA Text | Recipients Lists
Research Category: Sustainable and Healthy Communities , P3 Awards , P3 Challenge Area - Air Quality
Description:
Develop a wireless power transfer system that would reduce the weight of commercial airliners by reducing the amount—and therefore the weight—of wiring needed in the cabin for entertainment and productivity, eventually reducing aircraft carbon emissions.
Objective:
The objective of this proposal is to help reduce the amount of CO2 emission by reducing the weight of a commercial airplane by eliminating most of the power cables presently needed to supply electricity throughout the aircraft cabin and replacing them with a wireless power transfer network.
Approach:
The approach is to first simulate a design for the receiver which consists of an antenna, rectifier circuit, and DC-DC converter that produces the DC power that is supplied to the load. Then a prototype of the board will be built and measured using a network analyzer and other instruments to measure the power transfer efficiency of the device.
Expected Results:
The expected results include simulation results of the output power, and power transfer efficiency from the antenna to the load. The layout of the board and prototype of the board are expected to be completed. Finally, measurement results of the output power, and the power transfer efficiency are to be expected.
Publications and Presentations:
Publications have been submitted on this project: View all 2 publications for this projectSupplemental Keywords:
Wireless power transfer, wireless energy harvesting, buck-boost converter, charge pump;Progress and Final Reports:
P3 Phase II:
Reduce Carbon Emissions By Wireless Power Transfer | 2018 Progress Report | 2019 Progress Report | 2020 Progress Report | Final ReportThe perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Conclusions drawn by the principal investigators have not been reviewed by the Agency.
Project Research Results
- Final Report
- P3 Phase II | 2018 Progress Report | 2019 Progress Report | 2020 Progress Report | Final Report