Grantee Research Project Results
Development of 3D-printed surfaces for ultra-high surface area trickling biofilters for water pollution remediation
EPA Grant Number: SU836122Title: Development of 3D-printed surfaces for ultra-high surface area trickling biofilters for water pollution remediation
Investigators: Carrano, Andres
Institution: Auburn University Main Campus
EPA Project Officer: Page, Angela
Phase: I
Project Period: September 1, 2015 through August 31, 2016
Project Amount: $14,903
RFA: P3 Awards: A National Student Design Competition for Sustainability Focusing on People, Prosperity and the Planet (2015) RFA Text | Recipients Lists
Research Category: P3 Challenge Area - Safe and Sustainable Water Resources , P3 Awards , Pollution Prevention/Sustainable Development , Sustainable and Healthy Communities
Objective:
The goal of this project is to design, develop and evaluate new media for biofiltration of water by using complex shapes and geometries achieved with 3D printing to grow algae colonies.
Approach:
The following steps will be conducted:
- field data collection on natural substrata (colonized rock samples from rivers in Eastern Alabama
- Reverse metrology of natural substrata: to understand and document the rock surface features that provide the best habitat for algae
- Surface computer modeling to design features such as modularity, interlocking, ease of harvesting, and substrata fastening.
- Fabrication of surfaces with additive manufacturing (3D printers)
- Design and build of experimental apparatus: clear cylinders irradiated with grow lights from the outside and that will be filled with the media produced in the 3D printers.
- Testing and experimentation: The experiment will be conducted over 28 days and replicated twice for each condition. These biofilters will be placed in a wet lab and seeded with a periphytic community from a local stream for colony initiation.
- Sample Analysis: the media will be removed from the cylinders every 7 days (until day 28) and imaged at multiple magnifications. At the final (28-day) removal, the biofilm will be subsampled in three locations for multiple analyses.
- Economic analysis: yield data from the experimentation as well as the expenses and operational costs of the biofilters (projected into an industrial scale) to analyze breakeven points and returns on investment (ROI).
Expected Results:
Expected Outputs:
- A set of ultra-high surface area designs of filtration media that is highly conducive to mixed periphyton colonization and that present high biomass density
- A traveling prototype of a biofilter that will be display in the 2016 Expo and also for demonstration in local schools.
- A commercial feasibility study showing the productivity (yields) and economics of these designs at a large/industrial scale.
Expected Outcomes:
- Increase on the efficiency of biofilter systems
- Increased capacity of water treatment systems
- Increased use of more sustainable filter principles (combined periphyton and bacterial biofilm communities)
-
Potential development of highly efficient, portable trickling filters that can be deployed in rural areas.
Publications and Presentations:
Publications have been submitted on this project: View all 5 publications for this projectJournal Articles:
Journal Articles have been submitted on this project: View all 3 journal articles for this projectSupplemental Keywords:
Additive manufacturing, 3D printing, water filtering, algal colonization, periphyton.Progress and Final Reports:
P3 Phase II:
Development of 3D-printed surfaces for ultra-high surface area biofilters for water pollution remediation | 2017 Progress Report | Final ReportThe perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Conclusions drawn by the principal investigators have not been reviewed by the Agency.