Integrated Applications of the Clean Process Advisory System to P2-Conscious Process Analysis and ImprovementEPA Grant Number: R825370C077
Subproject: this is subproject number 077 , established and managed by the Center Director under grant R825370
(EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
Center: EERC - National Center for Clean Industrial and Treatment Technologies (CenCITT)
Center Director: Crittenden, John C.
Title: Integrated Applications of the Clean Process Advisory System to P2-Conscious Process Analysis and Improvement
Investigators: Shonnard, David R. , Barna, Bruce A. , Kline, Andrew A. , Rogers, Tony N.
Institution: Michigan Technological University
EPA Project Officer: Klieforth, Barbara I
Project Period: January 1, 1997 through January 1, 1999
RFA: Exploratory Environmental Research Centers (1992) RFA Text | Recipients Lists
Research Category: Center for Clean Industrial and Treatment Technologies (CenCITT) , Targeted Research
The purpose of this research project is to design cleaner and more profitable chemical processes through the application of rigorous optimization techniques. The investigators intend to show that methods currently used to judge optimization performance on a monetary scale may be applied to judge a process on a non-monetary basis (environmental). Another goal is to demonstrate integrated assessment of chemical process economic and environmental attributes using CPAS software already developed from prior CenCITT and other EPA support. The specific objectives are:
1) Develop a rigorous chemical process design and improvement methodology for
integrating environmental and economic measures of performance.
2) Further demonstrate the applications of multiple CPAS tools (EFRAT, DORT, and DEAR) by applying them in close coordination with a chemical process simulator (HYSYS ) for design evaluation of a suite of case studies.
3) Evaluate the influences of model uncertainty on the process optimization methodology. We will set up the framework for this analysis and apply it to a small number of model parameters.
4) Disseminate the results from these case study applications by publishing the results in peer-reviewed journals and presentation of results at national meetings.
The investigators propose a three-step method for rigorous process optimization as shown in Figure 1. In the first step, which is termed "Input/Output Screening," an initial critical examination of the process is performed resulting in a set of "Process Diagnosis Summaries". A process flowsheet is created and material and energy balances are performed using a commercial process simulator (HYSYS for our study). Then input/output tables for energy consumption and process emissions are created to spot process improvement opportunities. This step leads to an initial set of process parameters for consideration and process simulation.
The second step is referred to as "Parameter Identification". The objective functions, which are selected as the basis of the optimization, can consist of total annual cost, environmental impact indexes, or net present value. The process simulator and the CPAS software will again interact very closely to generate economic and environmental performance curves for each parameter studied. A Scaled Gradient Analysis is performed to identify a reduced parameter set to carry forward to the last step in the procedure.
In the last step of the project, "Multi-Variable Optimization", they will utilize the optimization capabilities within HYSYS and couple that capability with the assessment function of the SCENE software. This will allow us the flexibility to optimize on any single objective function, economic or environmental, or to utilize Analytic Hierarchic Processing (AHP) through the DEAR software as a method to generate a single objective function from multiple indexes of process performance.
Efficient chemical process designs are the key to future economic success and environmental protection. The chemical process and allied products industries, including petroleum refining, have provided innovative products and processes for the economy of the United States and for the global economy as well. However, estimates show that these industries are responsible for up to 80% of the industrial hazardous waste generated, treated, and disposed of in the U.S. each year. It has been estimated that approximately 5% of the raw materials entering these processes exit as waste stream components.
Previous process improvement methodologies minimized equipment and operating costs under the constraints of imposed emissions reduction targets. Unfortunately, focusing on single environmental or economic endpoints neglects the reality that there are multiple environmental and human health impacts, which are affected by process optimization. It is expected that through this project, the application of simultaneous economic and environmental optimization will address this important need for improving chemical process design based on multiple evaluation criteria.
Publications and Presentations:Publications have been submitted on this subproject: View all 2 publications for this subproject | View all 157 publications for this center
Journal Articles:Journal Articles have been submitted on this subproject: View all 1 journal articles for this subproject | View all 36 journal articles for this center
Supplemental Keywords:technology for sustainable environment, environmental chemistry, clean technology, environmental engineering, pollution prevention, cleaner production, computing technology, industrial process analysis, chemical process design, cost benefit analysis., RFA, Scientific Discipline, INTERNATIONAL COOPERATION, Ecosystem Protection/Environmental Exposure & Risk, Sustainable Industry/Business, cleaner production/pollution prevention, Sustainable Environment, Technology for Sustainable Environment, computing technology, Economics and Business, pollution prevention, Environmental Engineering, in-process changes, in-process waste minimization, industrial design for environment, industrial process design, cleaner production, environmentally conscious manufacturing, green design, pollution prevention design tool, pollution prevention assessment, clean technology, Design Option Ranking Tool (DORT), physico-chemical properties, computer science, Clean Process Advisory System (CPAS), CPAS, industrial process, process modification, chemical manufacturing, industry pollution prevention research, chemical properties tool, chemical processing, information technology, innovative technology, process analysis, industrial innovations, outreach and education, environmental fate and risk assessment tool (EFRAT), green technology
Progress and Final Reports:
Main Center Abstract and Reports:R825370 EERC - National Center for Clean Industrial and Treatment Technologies (CenCITT)
Subprojects under this Center: (EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
R825370C032 Means for Producing an Entirely New Generation of Lignin-Based Plastics
R825370C042 Environmentally Conscious Design for Construction
R825370C046 Clean Process Advisory System (CPAS) Core Activities
R825370C048 Investigation of the Partial Oxidation of Methane to Methanol in a Simulated Countercurrent Moving Bed Reactor
R825370C054 Predictive Tool for Ultrafiltration Performance
R825370C055 Heuristic Reactor Design for Clean Synthesis and Processing - Separative Reactors
R825370C056 Characterization of Selective Solid Acid Catalysts Towards the Rational Design of Catalytic Reactions
R825370C057 Environmentally Conscious Manufacturing: Prediction of Processing Waste Streams for Discrete Products
R825370C064 The Physical Properties Management System (PPMS): A P2 Engineering Aid to Support Process Design and Analysis
R825370C065 Development and Testing of Pollution Prevention Design Aids for Process Analysis and Decision Making
R825370C066 Design Tools for Chemical Process Safety: Accident Probability
R825370C067 Environmentally Conscious Manufacturing: Design for Disassembly (DFD) in De-Manufacturing of Products
R825370C068 An Economic Comparison of Wet and Dry Machining
R825370C069 In-Line Copper Recovery Technology
R825370C070 Selective Catalytic Hydrogenation of Lactic Acid
R825370C071 Biosynthesis of Polyhydroxyalkanoate Polymers from Industrial Wastewater
R825370C072 Tin Zeolites for Partial Oxidation Catalysis
R825370C073 Development of a High Performance Photocatalytic Reactor System for the Production of Methanol from Methane in the Gas Phase
R825370C074 Recovery of Waste Polymer Generated by Lost Foam Technology in the Metal Casting Industry
R825370C075 Industrial Implementation of the P2 Framework
R825370C076 Establishing Automated Linkages Between Existing P2-Related Software Design Tools
R825370C077 Integrated Applications of the Clean Process Advisory System to P2-Conscious Process Analysis and Improvement
R825370C078 Development of Environmental Indices for Green Chemical Production and Use