SCC  |
10300402 |
| Level 1 |
External Combustion Boilers |
| Level 2 |
Commercial/Institutional |
| Level 3 |
Residual Oil |
| Level 4 |
10-100 Million Btu/hr ** |
| POLLUTANT |
PM10, primary |
NEI PM10-PRI |
CAS |
Primary Control
CHEMICAL REDUCTION
|
|
| Emission Factor |
Formula Lb per 1000 Gallons Residual Oil Burned |
Revoked on 12/01/1999
|
| Quality |
D
Emissions Factors Applicability
|
|
| References |
EPA. September, 1998. Section 1.3, Fuel Oil Combustion. In: Compilation of Air Pollutant Emission Factors, Volume 1: Stationary Point and Area Sources, Fifth Edition, AP-42, Supplement E. U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards. Research Triangle Park, North Carolina. |
| AP 42 Section |
Chapter 1
Section 1.3
|
| Formula |
5.17A
(Factor is derived: 62% of the PM, total factor) |
| Notes |
Particulate emission factors for residual oil combustion without emission controls are, on average, a function of fuel oil grade and sulfur content where S is the weight % of sulfur in the oil. For example , if the fuel is 1.00% sulfur, then S=1. For Number 6 Oil: A=1.12(S)+0.37. For Number 5 Oil: A=1.2. For Number 4 Oil: A=0.84. For Number 2 Oil: A=0.24. |
