Emission Factor Details
SCC  |
10200903 | ||
| Level 1 |
External Combustion Boilers | ||
| Level 2 |
Industrial | ||
| Level 3 |
Wood/Bark Waste | ||
| Level 4 |
Wood-fired Boiler - Wet Wood (>=20% moisture) | ||
| POLLUTANT |
Polychlorinated dibenzofurans, total | NEI 136677106 |
CAS |
|
Primary Control
DIRECT FLAME AFTERBURNER WITH HEAT EXCHANGER |
|||
| Emission Factor |
2.900E-8 Lb per Ton Wood Burned | Revoked on 09/01/2003 | |
| Quality |
C Emissions Factors Applicability | ||
| References | EPA. February, 1999. Section 1.6, Wood Waste Combustion In Boilers. In: Compilation of Air Pollutant Emission Factors, Volume 1: Stationary Point and Area Sources, Fifth Edition, AP-42, Supplement E. U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards. Research Triangle Park, North Carolina. | ||
| AP 42 Section | Chapter 1 Section 1.6 | ||
| Formula | |||
| Notes | Units are lb of pollutant/ton of wood waste burned. Emission factors are based on wet, as-fired wood waste with average properties of 50 weight% moisture and 4500 Btu/lb higher heating value. Emission factor represents measurements from wood waste combustors equipped with PM controls (i.e., fabric filters, multi-cyclones, ESP, and wet scrubbers). Emission factor is for total furans, not toxic equivalents. Excludes data from the combustion of salt-laden wood. | ||
| Multiple Factor Info |
0 duplicate factors.
This one is different because... Factor is for combustion on salt-laden wood. |
||