SCC  |
10200901 |
| Level 1 |
External Combustion Boilers |
| Level 2 |
Industrial |
| Level 3 |
Wood/Bark Waste |
| Level 4 |
Bark-fired Boiler |
| POLLUTANT |
Benzo(g,h,i)perylene |
NEI 191242 |
CAS 191-24-2 |
Primary Control
DIRECT FLAME AFTERBURNER WITH HEAT EXCHANGER
|
|
| Emission Factor |
1.410E-6 Lb per Ton Bark Burned |
Revoked on 09/01/2003
|
| Quality |
D
Emissions Factors Applicability
|
|
| References |
EPA. February, 1999. Section 1.6, Wood Waste Combustion In Boilers. In: Compilation of Air Pollutant Emission Factors, Volume 1: Stationary Point and Area Sources, Fifth Edition, AP-42, Supplement E. U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards. Research Triangle Park, North Carolina. |
| AP 42 Section |
Chapter 1
Section 1.6
|
| Formula |
|
| Notes |
Units are lb of pollutant/ton of wood waste burned. Emission factors are based on wet, as-fired wood waste with average properties of 50 weight% moisture and 4500 Btu/lb higher heating value. Emission factor represents measurements from wood waste combustors equipped with PM controls (i.e., fabric filters, multi-cyclones, ESP, and wet scrubbers). Benzo(g,h,i)perylene is a Hazardous Air Pollutant (HAP). |
