Emission Factor Details
SCC | 10100901 | ||
Level 1 | External Combustion Boilers | ||
Level 2 | Electric Generation | ||
Level 3 | Wood/Bark Waste | ||
Level 4 | Bark-fired Boiler | ||
POLLUTANT | Phenol | NEI 108952 | CAS 108-95-2 |
Primary Control
DIRECT FLAME AFTERBURNER WITH HEAT EXCHANGER |
|||
Emission Factor | 1.470E-5 Lb per Ton Bark Burned | Revoked on 02/01/1999 | |
Quality | C Emissions Factors Applicability | ||
References | EPA. February, 1998. Section 1.6, Wood Waste Combustion In Boilers. In: Compilation of Air Pollutant Emission Factors, Volume 1: Stationary Point and Area Sources, Fifth Edition, AP-42, Supplement D. U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards. Research Triangle Park, North Carolina. | ||
AP 42 Section | Chapter 1 Section 1.6 | ||
Formula | |||
Notes | Units are lb of pollutant/ton of wood waste burned. Emission factors are based on wet, as-fired wood waste with average properties of 50 weight% moisture and 4500 Btu/lb higher heating value. Emission factor represents measurements from wood waste combustors equipped with PM controls (i.e., fabric filters, multi-cyclones, ESP, and wet scrubbers). Emission factor value includes phenol, which is a hazardous air pollutant (HAP), plus substituted phenols which are not HAPs. |