SCC  |
10100202 |
| Level 1 |
External Combustion Boilers |
| Level 2 |
Electric Generation |
| Level 3 |
Bituminous/Subbituminous Coal |
| Level 4 |
Pulverized Coal: Dry Bottom (Bituminous Coal) |
| POLLUTANT |
PM, condensable |
NEI PM-CON |
CAS |
Primary Control
ROTOCLONE
|
|
| Emission Factor |
Formula Lb per Ton Bituminous Coal Burned |
|
| Quality |
B
Emissions Factors Applicability
|
|
| References |
EPA. September, 1998. Section 1.1, Bituminous and Subbituminous Coal Combustion. In: Compilation of Air Pollutant Emission Factors, Volume 1: Stationary Point and Area Sources, Fifth Edition, AP-42, Supplement E. U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards. Research Triangle Park, North Carolina. |
| AP 42 Section |
Chapter 1
Section 1.1
|
| Formula |
(1E-1*S-3E-2)*26 |
| Notes |
Factor is for pulverized coal-fired boilers with all PM controls (without flue gas desulfurization controls). Factors should be multiplied by fuel rate on a heat input basis (MMBtu), as fired. To convert to lb/ton of bituminous coal, multiply by 26 MMBtu/ton. To convert to lb/ton of subbituminous coal, multiply by 20 MMBtu/ton. 80% of the condensable PM is inorganic; 20% of the condensable PM is organic. |
