You are here:
SINTERING AND SULFATION OF CALCIUM SILICATE-ALUMINATE
Citation:
Borgwardt*, R H. AND G. T. Rochelle. SINTERING AND SULFATION OF CALCIUM SILICATE-ALUMINATE. INDUSTRIAL ENGINEERING & CHEMICAL RESEARCH. American Chemical Society, Washington, DC, 29:2118-2123, (1990).
Impact/Purpose:
Information
Description:
The effect of sintering on the reactivity of solids at high temperature was studied. The nature of the interaction was studied with calcium silicate-aluminate reacting with SO2 between 665 and 800 C. The kinetics of the sintering and sulfation processes were measured independently in terms of the common variables, temperature and specific surface area. Surface reduction parameters were evaluated by the German-Munir sinter model, modified to account for a strong catalytic effect of H2O vapor. Sulfation parameters were determined from a series of conversion vs. time measurements at various temperatures using calcined solids of known surface area. These show product layer diffusion through CaSO4 to be the probable controlling process above 670 C and diffusion through a mixture of CaSO3 and CaSO4 controlling below that temperature. Like sintering, sulfation was enhanced by the presence of H2O in the feed gas. With 7% H2O vapor, the enhancement factor for sulfation was 1.5 at 665 C and estimated to be 5.0 at higher temperatures where only CaSO4 is formed. A combined sinter/sulfation model, based on the parameters evaluated for the independent processes, is compared to sulfation rates measured for the uncalcined solid when sintering is occurring simultaneously.