You are here:
LABORATORY EVALUATION OF ZERO-VALENT IRON TO TREAT WATER IMPACTED BY ACID MINE DRAINAGE
Citation:
Wilkin*, R T. AND M S. McNeil*. LABORATORY EVALUATION OF ZERO-VALENT IRON TO TREAT WATER IMPACTED BY ACID MINE DRAINAGE. CHEMOSPHERE 53(7):715-725, (2003).
Description:
This study examines the applicability and limitations of granular zero-valent iron for the treatment of water impacted by mine wastes. Rates of acid neutralization and of metal (Cu, Cd, Ni, Zn, Hg, Al, and Mn) and metalloid (As) uptake were determined in batch systems using simulated mine drainage (initial pH 2.3 to 4.5; total dissolved solids 14,000 to 16,000 mg L-1). Metal removal from solution and acid neutralization occurred simultaneously and were most rapid during the initial 24 h of reaction. Reaction half-lives ranged from 1.50 ? 0.09 h for Al to 8.15 ? 0.36 h for Zn. Geochemical model results indicate that metal removal is most effective in solutions that are highly undersaturated with respect to pure-metal hydroxides suggesting that adsorption is the initial and most rapid metal uptake mechanism. Continued adsorption onto or co-precipitation with iron corrosion products are secondary metal uptake processes. Sulfate green rust was identified as the primary iron corrosion product, which is shown to be the result of elevated [SO42-]/[HCO3-] ratios in solution. Reversibility studies indicate that zero-valent iron will retain metals after shifts in redox states are imposed, but that remobilization of metals may occur after the acid-neutralization capacity of the material is exhausted.