Keywords:
MT3D, transport model, fate, transport, modular, finite difference,
Model Keywords:
Clean Water Act (CWA), Land Use Changes, Pathway (e.g., inhalation, digestion, dermal, injection), Frequency and Duration, Location, Ecosystem, Water (e.g., surface water, ground water), Ground (e.g., soil, sediment), Area Source (e.g., spray, fertilizer, lagoon, holding area), Point Source (e.g., tank, spill, stack, discharge pipe), Chemical (e.g., organic, inorganic, toxics), Physical (e.g., radiation, heat particles, fibers, noise), Toxic Substances Control Act (TSCA), Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), Resource Conservation and Recovery Act (RCRA), Safe Drinking Water Act (SDWA),
Model Detail:
Model Evaluation
:Moderate model testing (evaluation) has been performed. The program was tested by evaluating relatively simple problems for which analytical solutions are available. This testing is described in the User's Manual.
The model has been internally peer reviewed. The program and User's Manual were internally reviewed by EPA's Office of Research and Development Subsurface Protection and Remediation Division through the Center for Subsurface Modeling Support (CSMoS).
Model URL
:http://hydro.geo.ua.edu/mt3d/
Model Guidance Documents
:The model is approved by EPA for regulatory uses.
The model requires calibration for contaminant concentrations at observation wells.
Documentation can be downloaded from:http://www.epa.gov/ada/csmos/models.html
For a paper copy of the User's Manual, send requests to: The Center for Subsurface Modeling Support (CSMoS), R.S. Kerr Research Center, P.O. Box 1198, Ada OK 74820. CSMoS will mail the requested manuals to the requestor.
To receive the User?s Manual in magnetic or optical format, send blank CDs, Zip disks, or 3.5" floppy diskettes to: The Center for Subsurface Modeling Support (CSMoS), R.S. Kerr Research Center, P.O. Box 1198, Ada OK 74820. CSMoS will copy the requested manuals to the supplied disks and return them to the requestor.
Provides:
(1) an abstract or abstract equivalent in the introduction,
(2) schematic/diagram showing model structure and interaction of model components,
(3) equations, equation solution methodologies, and related simplifying assumptions,
(4) example input/output files,
(5) input and output variable documentation including definitions, units, temporal/spatial dimensions, temporal/spatial resolution options, and (if applicable such as with FORTRAN) format,
(6) guidance on selecting and/or estimating values and/or distributions for input variables (including guidance on calibration and selecting default values and/or distributions),
(7) guidance on the analysis and interpretation of output, and
(8) description of sensitivity analysis, uncertainty analysis, and testing (validation) methodologies and results.
Model Download Information
:This model can be downloaded
HERE
modelcontactinfo
:Mingyu Wang
Center for Subsurface Modeling Support
wang.mingyu@epa.gov
580-436-8656
Zheng, Chunmiao, 1990. MT3D, A modular three-dimensional transport model for simulation of advection, dispersion and chemical reactions of contaminants in groundwater systems, Report to the U.S. Environmental Protection Agency, 170 p
Model Computer Requirements:
Model Operating Systems Needs
:DOS, Windows
Model Hardware Needs
:This system was designed to run under DOS (Disk Operating System) on an IBM PC, XT, AT, PS2, or compatible computer. Graphics capability is not required, but is highly recommended, as most programs will produce graphics output. Graphics support is provided for the Hercules graphics card, the Color Graphics Adapter (CGA), and the Enhanced Graphics Adapter (EGA). At least 512 kilobytes (Kb) of random access memory (RAM) is required, but 640 Kb is recommended. An arithmetic co-processor chip is strongly recommended due to the computationally intensive nature of the programs, but is not required for use. Programs may be run from floppy diskette, however, a fixed disk is required to use the programs from the system menu. The system storage requirement is approximately three megabytes.
Model Programming Language(s)
:The program requires the solution of the groundwater flow field produced by a block centered flow model such as MODFLOW.
other_req
:Fortran