You are here:
PERFORMANCE AND MODELING OF A HOT POTASSIUM CARBONATE ACID GAS REMOVAL SYSTEM IN TREATING COAL GAS
Citation:
Ferrell, J., J. Staton, AND R. Rousseau. PERFORMANCE AND MODELING OF A HOT POTASSIUM CARBONATE ACID GAS REMOVAL SYSTEM IN TREATING COAL GAS. U.S. Environmental Protection Agency, Washington, D.C., EPA/600/7-87/023 (NTIS PB88131297), 1987.
Description:
The report discusses the performance and modeling of a hot potassium carbonate (K2CO3) acid gas removal system (AGRS) in treating coal gas. Aqueous solutions of K2CO3, with and without amine additive, were used as the acid gas removal solvent in the Coal Gasification/Gas Cleaning Test Facility at North Carolina State University. The AGRS consisted of a packed absorption column, one or more flash tanks for intermediate pressure reduction, and a packed stripping column operated with a reboiler. The removal of CO2, H2S, COS, and other species from the crude coal gas was studied, and data on the distribution of these gases in regeneration exit streams were obtained. Operating conditions for the selective removal of sulfur species were also examined. A system model for chemical solvents was developed and incorporated in a simulation program. The model was based on mass transfer rate of a key component, CO2, with the assumption that non-key reactive components affect the equilibrium of the key component, but not its mass transfer rate. The absorption and stripping of non-key components were assumed to be controlled by equilibrium between the gas and liquid phases in these columns. An isothermal flash model for chemical solvents was also developed and included in the program. Agreement between program predictions and pilot plant data was good.