You are here:
EVALUATION OF HAZARDOUS WASTE INCINERATION IN A LIME KILN: ROCKWELL LIME COMPANY
Citation:
Day, D. AND L. Cox. EVALUATION OF HAZARDOUS WASTE INCINERATION IN A LIME KILN: ROCKWELL LIME COMPANY. U.S. Environmental Protection Agency, Washington, D.C., EPA/600/2-84/132.
Description:
During a one-week test burn, hazardous waste was used as supplemental fuel and co-fired with petroleum coke in a lime kiln in eastern Wisconsin. Detailed sampling and analysis was conducted on the stack gas for principal organic hazardous constituents (POHCs), particulates, particulate metals, HCl, SO2, NOx, CO, and THC and on process streams for metals and chlorine. POHCs were also analyzed in the waste fuel. Sampling was conducted during three baseline and five waste fuel test burn days. The program objectives were to determine the destruction and removal efficiency (DRE) for each POHC, determine concentration of stack gas pollutants under baseline and waste fuel test burn conditions, determine the fate of chlorine, sulfur, and trace metals in the kiln process, and evaluate kiln performance when operating with hazardous waste as supplemental fuel. Results show average DRE's greater than 99.99 percent for each POHC and little change in pollutant emissions from baseline to waste fuel test conditions. In addition, material balance results show that 95 percent of chlorine enters the process from the limestone feed and the chlorine exits the kiln in the baghouse dust and lime product at 61 percent and 38 percent, respectively.