You are here:
CHARACTERIZATION OF EMISSIONS FROM THE COMBUSTION OF WOOD AND ALTERNATIVE FUELS IN A RESIDENTIAL WOODSTOVE
Citation:
Truesdale, R., K. Mack, J. White, K. Leese, AND J. Cleland. CHARACTERIZATION OF EMISSIONS FROM THE COMBUSTION OF WOOD AND ALTERNATIVE FUELS IN A RESIDENTIAL WOODSTOVE. U.S. Environmental Protection Agency, Washington, D.C., EPA/600/7-84/094.
Description:
The report gives results of a comparison of emissions from the combustion of alternative fuels to those from wood in a residential woodstove, and of a study of the effects of woodstove operating parameters on combustion emissions. Overall, oak wood is the best fuel tested, considering both emissions and stove operation. Compressed wood logs with binders and bituminous coal produce the highest emissions of SO2, particulate, and NOx. Compressed wood logs without binders and treated lumber produce the highest PAH emissions. Important parameters affecting CO emission levels are fuel structure and, to a lesser degree, combustion air flow. SO2 emission levels are related directly to fuel sulfur content. NOx emissions are controlled by fuel nitrogen content and combustion air flow rate. Organic emissions are affected by fuel consumption rate, fuel structure, and the amount of air through the stove. Total discharge severities for PAHs measured during this study indicate that PAHs are the pollutants of highest concern in the flue gas effluent stream. PAH formation is affected by combustion air flow, firebox temperature, and fuel structure. Bioassay results indicate the presence of both mutagens and promutagens in the organic extracts of flue gas samples from both wood and coal combustion tests.