You are here:
SORPTION OF MERCURY SPECIES BY ACTIVATED CARBONS AND CALCIUM-BASES SORBENTS: EFFECT OF TEMPERATURE, MERCURY CONCENTRATION AND ACID GASES
Citation:
Ghorishi, B. AND B K. Gullett*. SORPTION OF MERCURY SPECIES BY ACTIVATED CARBONS AND CALCIUM-BASES SORBENTS: EFFECT OF TEMPERATURE, MERCURY CONCENTRATION AND ACID GASES. Waste Management and Research 16(6):582-593, (1998).
Impact/Purpose:
To share information.
Description:
Bench-scale studies of mercury/sorbent reactions were conducted to understand mechanistic limitations of field-scale attempts to reduce emissions of mercury from combustion processes. The effects of temperature (60 - 140 degrees C), sulfur dioxide (SO2, 1000 ppm ), hydrogen chloride (HCI, 50 ppm), and water vapor (5% molar) on the capture of elemental mercury (Hgo, 8 - 40 ppb) by two thermally activated carbons, and on the capture of mercuric chloride (HgCl2, 11-73 ppb) by two calcium (Ca)-based sorbents were examined in a fixed-bed, bench-scale system. Capture of mercury species is affected by sorbent site activity. HgCl2, is quickly adsorbed by the alkaline sites of Ca-based sorbents; sorption in combustors will likely be kinetically limited. Hgo, however, is more effectively removed by activated carbons; here the number of active sites appears to limit removal from flue gas. SO2 and HCl were found to either enhance or reduce sorption depending on the species of mercury. Enhancement of Hgo capture by activated carbon is associated with formation of active carbon-chlorine or carbon-sulfur sites while reduced capture of HgCl2 is due to loss of alkaline sites through Ca-SO2 and Ca-HCl reactions.
URLs/Downloads:
SORPTION OF MERCURY SPECIES BY ACTIVATED CARBONS AND CALCIUM-BASES SORBENTS: EFFECT OF TEMPERATURE, MERCURY CONCENTRATION AND ACID GASES (PDF, NA pp, 506 KB, about PDF)Journal Access
