Jump to main content.

OLS : Record

RECORD NUMBER: 2 OF 7

Main Title Air emissions from reinforced plastics composite manufacturing process Lasco panel products final report. Vol. 1. Report text, appendix A.1/ {microform} :
Author Meadows, F.; Scheffel, D. F.
CORP Author Pacific Environmental Services.
Publisher U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards,
Place Published Research Triangle Park, N.C. :
Year Published 1999
Report Number EPA-454/R-99-024a; EPA-68-D-70069; EPA/454/R-99/024A
Stock Number PB2002-100915
OCLC Number 51562977
Subjects Air pollution; Reinforced plastics; Emissions; Quality assurance; Quality control; Manufacturing; Composites; Clean Air Act; Testing; Sampling; Lamination processes; Sytrene; Volatile organic compounds; Maximum Achievable Control Technology(MACT); Total hydrocarbons; Florence(Kentucky)
Holdings
Library   Call Number Additional Info Location Date Modified
ERBD PB2002-100915 NERL/ESD-LV Library/Las Vegas,NV 04/18/2003
NTIS PB2002-100915 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation 498 p. : ill.
Abstract The United State Environmental Protection Agency (EPA) Emission Standards Division (ESD) requested that the EPA's Emissions Monitoring and Analysis Division (EMAD), Emission Measurement Center (EMC) provide testing support in the investigation of the reinforced plastics composite manufacturing source category to properly set the Maximum Achievable Control Technology (MACT) standards as required by the Clean Air Act Amendments of 1990. The reinforced plastics composite manufacturing process located at LASCO Panel Products in Florence, Kentucky was selected by the ESD as the host facility for this emissions testing program. The sampling program was designed to support the following ESD objectives: (1) Identify and quantify the hazardous air pollutants (HAPs) emitted by reinforced plastic manufacturing, (2) Identify the sources of HAPs and the total HAPs mass emission rates from the wet application area and the oven area, (3) Evaluate three ventilation scenarios, (4) Depending on the effectiveness of the industry proposed 'closed' system, develop a performance-based emission limitation achieved by the use of a wet area enclosed table system, (5) Assess the existing emission factors for volatile organic compound emissions from a continuous lamination process for the purposes of updating the information in AP-42 and determining cost effectiveness for MACT options involving emissions abatement, and (6) Determine the effect of various process parameters such as line speed, laminate thickness, HAP content of raw material and the addition of a gel coat layer on the emission factor. Sampling was performed during 13 process operating conditions. Measurements were made of the total hydrocarbons (THC), styrene, cumene, and methyl methacrylate (MMA), and the air flow rate at all enclosure exhausts. A secondary objective of the sampling program was to obtain the emissions of HAPs from the oven stacks. This volume (Volume I) is comprised of 464 pages and consists of the report text and Appendix A.1 (Manual Methods Raw Field Data).
Notes EPA project officer: Solomon Ricks. "Author(s): Franklin Meadows, Daniel F. Scheffel"--Tech. rep. data. "August 1999." "EPA-454/R-99-024a"--Cover. Microfiche. Prepared by Pacific Environmental Services, Inc. for U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards, Emissions, Monitoring and Analysis Division.
Contents Notes v.1. Report text, appendix A.1 -- v.2. Appendix A.2 -- v.3 Appendix B, C, D, and E.
Supplementary Notes See also PB2002-100916 and PB2002-100917. Sponsored by Environmental Protection Agency, Research Triangle Park, NC. Office of Air Quality Planning and Standards.
Availability Notes Product reproduced from digital image. Order this product from NTIS by: phone at 1-800-553-NTIS (U.S. customers); (703)605-6000 (other countries); fax at (703)605-6900; and email at orders@ntis.gov. NTIS is located at 5285 Port Royal Road, Springfield, VA, 22161, USA.
Author Added Ent
Meadows, Franklin.;
Scheffel, Daniel F.;
Ricks, Solomon.
Corporate Au Added Ent United States. Environmental Protection Agency. Emissions, Monitoring and Analysis Division.
PUB Date Free Form {1999}.
NTIS Prices PC A22/MF A04
BIB Level m
Medium microform
OCLC Time Stamp 20030414130725
Cataloging Source OCLC/T
Language eng
Origin OCLC
Type MERGE
OCLC Rec Leader 01717nam 2200337Ka 45020


Local Navigation


Jump to main content.