Search Results for the EPA National Library Catalog

Items Found: 128

Showing: Items 1 - 50

Your Search: (SUBJECT=Valves)

 
 
 

1 2 3 NEXT
Select Item Title Year Published
  1 1995 protocol for equipment leak emission estimates / 1995
  2 1997 variable valve actuation and power boost. 1997
  3 1998 variable valve actuation and power boost. 1998
  4 ANSI/AWWA C223-13 : fabricated steel and stainless steel tapping sleeves / 2013
  5 Approaches to risk assessment for multiple chemical exposures / 1984
  6 Approaches to risk assessment for multiple chemical exposures {microform} / 1984
  7 AWWA standard for air-release, air-vacuum, and combination air valves for waterworks service. 1992
  8 AWWA standard for ball valves, 6 in. through 48 in. (150 mm through 1200 mm). 1992
  9 AWWA standard for double check valve backflow-prevention assembly. 1998
  10 AWWA standard for double check valve backflow-prevention assembly. 1989
  11 AWWA standard for open-channel, fabricated-metal slide gates. 1997
  12 AWWA standard for power-actuating devices for valves and sluice gates 1994
  13 AWWA standard for protective epoxy interior coatings for valves and hydrants. 1990
  14 AWWA standard for reduced-pressure principle backflow-prevention assembly. 1998
  15 AWWA standard for reduced-pressure principle backflow-prevention assembly. 1989
  16 AWWA standard for resilient-seated gate valves for water supply service. 1994
  17 AWWA standard for rubber-seated butterfly wvalves. 1994
  18 AWWA standard for swing-check valves for waterworks service, 2 in. (50 mm) through 24 in. (600 mm) NPS. 1993
  19 AWWA standard for underground service line valves and fittings. 1989
  20 Benzene equipment leak inspection manual / 1990
  21 Benzene equipment leak inspection manual {microform} / 1990
  22 Blast furnace slips and accompanying emissions as an air pollution source / 1976
  23 Characterization of Leaded Fuel Needs and Use Task 2 Topical Report. 1985
  24 Condition assessment of water main appurtenances / 2012
  25 Construction Details of Isokinetic Source-Sampling Equipment. 1971
  26 Control of NO(x) Emissions from Mobile Sources. 1972
  27 CRC pilot program to investigate the effect on driveability of intake valve deposits and variations in fuel volatility : (CRC project no. CM-118-92) / 1993
  28 Criteria for valve location and system reliability 2006
  29 Design and analysis of piping and components, 1990 : including valve testing and applications : presented at the 1990 Pressure Vessels and Piping Conference, Nashville, Tennessee, June 17-21, 1990 / 1990
  30 Detailed Design: Rankine-Cycle Power System With Organic-Based Working Fluid and Reciprocating Expander for Automobile Propulsion. Volume II. Appendices. 1972
  31 Development of technical specifications for standard gas-diluent mixtures for use in measurement of mobile source emissions / 1974
  32 Distribution valves : selection, installation, field testing, and maintenance. 1996
  33 Don't Wait Until 1998: Spill, Overfill, and Corrosion Protection for Underground Storage Tanks Regulated in New Jersey. 1995
  34 Don't Wait Until 1998: Spill, Overfill, and Corrosion Protection for Underground Storage Tanks. 1994
  35 Emission testing of 1974 Pontiac V-8 with defective thermal vacuum valves. 1976
  36 Emissions and fuel economy of a vehicle equipped with the Eaton valve selector / 1980
  37 Emissions and fuel economy of Turbo-Carb : a retrofit device / 1982
  38 EPA evaluation of the "Auto-Miser" device / 1980
  39 EPA evaluation of the "Environmental Fuel Saver" device / 1980
  40 EPA evaluation of the Atomized Vapor Injector device under section 511 of the Motor Vehicle Information and Cost Savings Act / 1983
  41 EPA evaluation of the Cyclone-Z device under Section 511 of the Motor Vehicle Information and Cost Savings Act / 1983
  42 EPA evaluation of the Dresser Economizer device under Section 511 of the Motor Vehicle Information and Cost Savings Act / 1982
  43 EPA evaluation of the dynamix device under Section 511 of the motor vehicle information and cost savings act / 1982
  44 EPA evaluation of the Energy Gas Saver under section 511 of the Motor Vehicle Information and Cost Savings Act / 1982
  45 EPA evaluation of the freedom products hot tip device under Section 511 of the Motor Vehicle Information and Cost Savings Act / 1982
  46 EPA evaluation of the FUEL-MAX device under section 511 of the Motor Vehicle Information and Cost Savings Act / 1981
  47 EPA evaluation of the gas saving and emission control improvement device under Section 511 of the Motor Vehicle Information and Cost Savings Act / 1983
  48 EPA evaluation of the Malpassi Filter King device under Section 511 of the Motor Vehicle Information and Cost Savings Act / 1983
  49 EPA evaluation of the Optimizer device under section 511 of the Motor Vehicle Information and Cost Savings Act / 1983
  50 EPA evaluation of the P.S.C.U. 01 device under Section 511 of the Motor Vehicle Information and Cost Savings Act / 1983
1 2 3 NEXT

Save, Print or Email Selected Records