Jump to main content.

OLS : Record

RECORD NUMBER: 21 OF 4132

Main Title Accutech pneumatic fracturing extraction and hot gas injection : phase 1. Volume 1, {microform} /
Author Skovronek, Herbert S.
CORP Author Science Applications International Corp., Hackensack, NJ.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
Publisher Risk Reduction Engineering Laboratory, Office of Research and Development, U.S. Environmental Protection Agency,
Place Published Cincinnati, OH :
Year Published 1993
Report Number EPA/540/R-93/509; EPA-68-CO-0048
Stock Number PB93-216596
OCLC Number 46707430
Subjects Superfund Innovative Technology Evaluation Program (U.S.); Land pollution control; Remedial action; Soil treatment; Volatile organic compounds; Fracturing; Performance evaluation; Vadose water; Injection; Technology innovation; Cost analysis; Quality assurance; Soil vapor extraction; Pneumatic fracturing extraction
Subject Added Ent Hazardous wastes--Research--United States; Hazardous waste treatment facilities--United States
Holdings
Library   Call Number Additional Info Location Date Modified
ERBD PB93-216596 NERL/ESD-LV Library/Las Vegas,NV 04/20/2001
NTIS PB93-216596 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation 165 p. : ill. ; 28 cm.
Abstract The Pneumatic Fracturing Extraction (PFE) process developed by Accutech Remedial Systems, Inc. makes it possible to use vapor extraction to remove volatile organics at increased rates from a broader range of vadose zones. The low permeability of silts, clays, shales, etc. would otherwise make such formations unsuitable for cost-effective vapor extraction and require more costly approaches. Pneumatic fracturing provides an innovative means of increasing the permeability of a formation and thus extending the radius of influence so that contaminants can be effectively extracted. In the PFE process, fracture wells are drilled in the contaminated vadose zone and left open bore (uncased) for most of their depth. A packer system is used to isolate small (2 ft) intervals so that short bursts (- 20 sec) of compressed air (less than 500 psig) can be injected into the interval to fracture the formation. The process is repeated for each interval. The fracturing extends and enlarges existing fissures and/or introduces new fractures, primarily in the horizontal direction. When fracturing has been completed, the formations then subjected to vapor extraction.
Notes "SITE, Superfund Innovative Technology Evaluation"--Cover. "July 1993." "EPA/540/R-93/509." Microfiche.
Supplementary Notes Sponsored by Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
Corporate Au Added Ent Science Applications International Corporation ; Risk Reduction Engineering Laboratory (U.S.)
Alternate Title Technology evaluation report site program and demonstration test.
PUB Date Free Form {1993}
Series Title Traced Technology demonstration summary
NTIS Prices PC A08/MF A02
BIB Level m
OCLC Time Stamp 20010411141709
Cataloging Source OCLC/T
Language eng
Origin OCLC
Type MERGE
OCLC Rec Leader 01446nam 2200325Ka 45020


Local Navigation


Jump to main content.